the Internet's largest lightbar, siren, and emergency equipment forum
Forum options:  Search  Member list  Register  Profile  Log in to check your private messages  Log in |
Notice: Thanks for your patience as we work to restore full service. In the mean time, please try out our new chat room.
Fed Sig Legend LED Lightbar Flash Patterns
  |
| Author | Message | ||||||
|---|---|---|---|---|---|---|---|
| R1MS12 Regular  Joined: 01 Jun 2007 Posts: 132 Location: DC and NY |
|
||||||
 |
|||||||
| ff168577 Regular Joined: 02 Jul 2008 Posts: 70 Location: Levittown, Pa |
|
||||||
|
|||||||
| cajunblitz Professional Upfitter Joined: 12 Apr 2006 Posts: 765 Location: Saint Martin Parish, Louisiana |
Locate your Serial Interface Module first. You have to program the patterns from highest setting to lowest i.e. Position 3 first, then Position 2 then position 1. Flip the #6 DIP switch on your serial interface module on, then apply ignition to the serial inteface module (if it's already wired into your car, turn the key on) then apply power to position 3. Press and release the little button on the serial interface module and watch the bar...the pattern will change. Let it cycle through at least once, then remove power from the position 3 (wire). Apply power to Position 2 , then press the switch until the pattern changes to what you want again. Let it cycle once on the pattern you want, then remove power from Position 2. Apply power to Position one and repeat the directions. Remove power from position one, flip the DIP switch off, and THEN remove ignition. If you remove ignition at any time during your programming session, you will not lock in your new patterns. AWait until you are completely done before removing ignition. Click here for the PDF: Serial Interface Module cajunblitz |
||||||
Professional Upfitter
Joined: 12 Apr 2006
Posts: 765
Location: Saint Martin Parish, Louisiana
 Posted: Mon 3-Nov-2008 16:40 Post subject: Re: Fed Sig Legend LED Lightbar Flash Patterns |
 |
| [quote:d1d15cac34=\"R1MS12\"]I have tried searching, but still have not come up with a way to change flashpatterns on this bad boy. I have no experience with this product, but need to change the flash patterns on it - can anyone help point me in the right direction? Thanks in advance for any assistance. | |
Locate your Serial Interface Module first.
You have to program the patterns from highest setting to lowest i.e. Position 3 first, then Position 2 then position 1.
Flip the #6 DIP switch on your serial interface module on, then apply ignition to the serial inteface module (if it's already wired into your car, turn the key on) then apply power to position 3.
Press and release the little button on the serial interface module and watch the bar...the pattern will change. Keep pressinguntil you find a pattern you like, but wait a few seconds for the pattern to cycle before pressing again .Once you find your pattern for Position 3, let it cycle through at least once, then remove power from the position 3 (wire).
Apply power to Position 2 , then press the switch until the pattern changes to what you want again. Let it cycle once on the pattern you want, then remove power from Position 2.
Apply power to Position one and repeat the directions.
Remove power from position one, flip the DIP switch off, and THEN remove ignition. If you remove ignition at any time during your programming session, you will not lock in your new patterns. AWait until you are completely done before removing ignition.
Click here for the PDF:
Serial Interface Module
cajunblitz
Regular
Joined: 02 Jul 2008
Posts: 70
Location: Levittown, Pa
| Posted: Mon 3-Nov-2008 16:46 Post subject: |
|
| I am sorry I was thinking the highlighter. My apologies. Thanks cajun for handleing. | |
Regular
Joined: 01 Jun 2007
Posts: 132
Location: DC and NY
| Posted: Mon 3-Nov-2008 21:39 Post subject: |
|
| Outstanding, many thanks. | |
| |
All times are GMT - 6 Hours |
|
By accessing any part of this site, you acknowledge/accept the terms and conditions laid out in our site guidelines.