The Official "Identify This Light or Lightbar" Thread

[ffjwhite]

Looks like an edge 9000 I think the spot light is a custom job.

[ncsflorida]

Looks like an edge 9000 I think the spot light is a custom job.

Is it a special lens kit? I've never saw any other edges with the end cap.

[ffjwhite]

The pictures show two different style of end caps, the top picture is no longer made. The bottom one is the old edge 9000. To find them brand new is going to be hard unless someone has new old stock lenses.

[shues]

Is it a special lens kit? I've never saw any other edges with the end cap.

It's a "duplex" Edge, maybe something like an 9622. It's set up with two levels of lighting. The bottom portion of the endcap is clear for an alley light. tlsee posted a closeup photo a few months ago in another thread:

heres a picture

[JohnMarcson]

It's a "duplex" Edge, maybe something like an 9622. It's set up with two levels of lighting. The bottom portion of the endcap is clear for an alley light. tlsee posted a closeup photo a few months ago in another thread:

If I remember correctly, unless an alley cutout is needed, a duplex edge takes a regular 9000 cap.... The duplex and 9000 alley cut outs are totally different (square full height vs rectangle half height as shown).

[FireGuru]

fire fighter light bar i have no idea what it is?

It looks like the old Yankee bars with the shorter lens. Maybe Dietz. I am almost positive that that is what they are, but I've been wrong before.

[JohnMarcson]

It looks like the old Yankee bars with the shorter lens. Maybe Dietz. I am almost positive that that is what they are, but I've been wrong before.

I think it's an old svp bar. the speaker housing is the key...

[FireGuru]

I think it's an old svp bar. the speaker housing is the key...

Aha!! See... told you I've been known to be wrong before... haha.

Thanks John

[I 26]

Looking for make/model and value in condition pictured...thanks!

[Richard P]

Looking for make/model and value in condition pictured...thanks!

deitz omnicheif? looks like deitz rotators, but the lenses seem to be too rounded

[CrownVic97]

Could be a Smith & Wesson too. They had their version of the TwinSonic as well, but they used a belt system to syncronize the rotators.

[kadetklapp]

Looks like a Napa/Dietz Omnichief. They used belts as well IIRC.

[plybeep68]

deitz omnicheif? looks like deitz rotators, but the lenses seem to be too rounded

I have an Omni Chief and the lenses/domes/covers( whatever you want to call them,lol) are rounded like that also,mine appear to be oringinal but this is only the second one that i have seen

[LRGJr72]

That IS a Dietz OmniChief. But it has either Twinsonic or Code 3 SD lenses forced onto it. I think that's why the speaker cover looks a little out of its proper seating. The OmniChief bar is really rare. There were tons of them used in the movie "Smokey & the Bandit 2." My dad had one in all-amber on a wrecker he owned back in the 70s.

[I 26]

That IS a Dietz OmniChief. But it has either Twinsonic or Code 3 SD lenses forced onto it. I think that's why the speaker cover looks a little out of its proper seating. The OmniChief bar is really rare. There were tons of them used in the movie "Smokey & the Bandit 2." My dad had one in all-amber on a wrecker he owned back in the 70s.

What value would you place on this bar? Are proper lenses hard to come by?

[emtanderson51]

Well obviously it's an edge, anyone got a model? Brevard SO in Florida by the way.

Attachment 24609Attachment 24610

I am going to say this is a 9622 bar.....it is definitely a 96 series and I think the 22 represents 12 strobe models as the 9620 bars were 10 strobe. Please don't flame me if I am wrong as this has not been stated as fact.......other than it is def a 96 series...

[JohnMarcson]

I am going to say this is a 9622 bar.....it is definitely a 96 series and I think the 22 represents 12 strobe models as the 9620 bars were 10 strobe. Please don't flame me if I am wrong as this has not been stated as fact.......other than it is def a 96 series...

The one on the left is a 96 series, you can't tell 100% what model w/o a front view, although 9622 is possible. The one on the right has a full height alley so it can't be 96 series. It appears to be 94 series which is a mix of duplex center options with traditional edge corners.

[kd0giz]

Those globes are from a runway/taxiway light. They look like crouse hinds globes. I'm not sure what the fixture is though, it may be something custom made for the movie.

These are made by Federal Signal's industrial division, I dont have a model number but they are available in 24VDC or 110VAC and others. They are commonly used as process indicators or as indicators on overhead industrial cranes.

[LAPDfalcon]

Any idea what this is? I think it's proberly something common.

[kd0giz]

Any idea what this is? I think it's proberly something common.

It is a federal signal jetsonic. Can't tell if its a cal-spec model or not.

[I 26]

Any idea what this is? I think it's proberly something common.

Federal Signal Jetsonic - yes, fairly common in the 80's and 90's.

[I 26]

It is a federal signal jetsonic. Can't tell if its a cal-spec model or not.

Beat me to it - oh well...

[LAPDfalcon]

^ Thanks guys

[HPD84]

It is a federal signal jetsonic. Can't tell if its a cal-spec model or not.

This one was way too easy! Lets get a challenging one here!!!

[nerdly_dood]

This sure looks a whole lot like a Liberty, but it's got 6 forward-facing LED heads and a pair of dual-LR11 takedowns, which makes me think it's not a Libby.

Attachment 25108

[JGG]

Looks like an Axixtech Torrent.

[rad123]

I agree with JGG.

[nerdly_dood]

Looks like an Axixtech Torrent.

Looks about right, thanks.

[kadetklapp]

Need a little help here-

[Hoser]

Need a little help here-

Whats the deal with that?