Thread: SE8BBBB

Hello all, my ? is can you add more light heads to a SE8BBBB? any help would be great

You might want to explain your question a little better. IE; what light and model number, be more specific.

It would be a whelen liberty light bar model SE8BBBB

Slightly confused... If I understand the morsels correctly, this is am Economy bar (the E in the model number). Not sure if that means you have economy heads (depopulated) or just economy corners. By "adding more heads" do you mean heads with more LEDs, or more 500 Series modules? It depends on how many modules you have in it already?

my guess is that you have an economy style whelen liberty light bar and if that is the case then yes and no...you can add light heads if there is room but i don't know how you would wire them to the bored...

Originally Posted by Zapp Brannigan

Slightly confused... If I understand the morsels correctly, this is am Economy bar (the E in the model number). Not sure if that means you have economy heads (depopulated) or just economy corners. By "adding more heads" do you mean heads with more LEDs, or more 500 Series modules? It depends on how many modules you have in it already?

i figured out that he has some type of whelen liberty module because the "s" is the first letter for a liberty designation I.E whelen.com

You should be able to. On my SX8BBBB (which is also forsale) I removed the takedowns and added in a set of lin6. There is usually a open outlet on the harness for "aux" which I plugged mine into and it is now full led. If your looking to add more I have one depop 500 series in blue that i have forsale.

Originally Posted by Sffd24

Hello all, my ? is can you add more light heads to a SE8BBBB? any help would be great

Yes, you can fully load an SE8 lightbar.

Inside a SE8BBBB Lightbar are two ULF22 LED flashers, one for front, one for rear. There are two outputs on each flasher - orange and brown. The harness has daisy chained plugs from each flasher that run across the lightbar. So if you looked at the rear of your lightbar from the top, your driver rear corner would be an orange output, the lighthead next to it brown, and so on down the line. Does that make sense?

Originally Posted by philter74

Yes, you can fully load an SE8 lightbar.

Inside a SE8BBBB Lightbar are two ULF22 LED flashers, one for front, one for rear. There are two outputs on each flasher - orange and brown. The harness has daisy chained plugs from each flasher that run across the lightbar. So if you looked at the rear of your lightbar from the top, your driver rear corner would be an orange output, the lighthead next to it brown, and so on down the line. Does that make sense?

This is correct. I just put a new harness in the same bar. If I remember right it will hold up to 14 lightheads. The one I was working on had 2 unused plugs coming off the flasher.