Results 1 to 2 of 2
August 10th, 2011, 04:34 PM #1
Strobe Connectors, Pins and Tools
There was a sticky on the old board that I used to keep bookmarked. Luckily I found the info in my order history.
Here is everything you need for ordering pins, connectors, tools, etc
Pins, Connectors, Extraction tool, crimper from Mouser:
Mouser #: 571-606171
Mfr. #: 60617-1
Desc.: Power to the Board SOCKET 24-18 BULK
Mouser #: 571-606181
Mfr. #: 60618-1
Desc.: Power to the Board PIN 24-18 AWG
*I have not purchased these but I believe they are the correct part number.
Crimper from Waytek (Significantly cheaper):
MOLEX MX150L CRIMPING TOOL
Sub Category: Molex Tools
Description: MOLEX MX150L CRIMPING TOOL
ECONOMY MODEL 64016-0035
Selling U/M: EA
Not sure if the mods want to make this a sticky!
-RobEMS Captain - Medic 646
Somers (CT) Fire Department
Install Thread: http://elightbars.org/f34/2005-tahoe-lt-pov-23192/
August 12th, 2011, 08:19 PM #2Newbie
Orlando, FL4 Posts
- Joined July 2011
12 Pin Shells
Thought I would add to this timely thread. I was searching out the connector for a Whelen siren earlier this week.
The part number for the 12 pin shell (Whelen sirens, TAs also, I believe):
Male: 1-480275-0* (per data sheet)
Same pins as above.
14-20AWG pins & sockets:
*Same as above, I have not purchased these items. Data sheets and catalogs indicate these are mating components.