Thread: Strobes N More custom swtich for the E66 series nightsticks

The E66 switch is a custom make plug and play switch designed specifically for our E66 series of warning sticks. These sticks give you warning and traffic arrow patterns all in one. What makes this switch so nice is that is also gives you and output to run other warning lights off the same switch that activates the E66 warning patterns. So you can switch on the E66 and any other lights you have with one nice pre made switch. The switch will only need to be wired to +12 volts and -12 volts ground then you simply match up the wires from your E66 and you are done. The switch comes with quick splices and heat shrink to cover them up. The switches are all lighted and labeled. The switch also give you the ability to select the flash pattern at your finger tips. Overall a very nice switch which was designed from user/customer feedback. If you have any questions watch the video on the site or email me with any questions. Louis@strobesnmore.com

Strobes N' More

Looks simple and affordable. This setup of switches could run almost any built in whelen LED TA. They use the left + right = center out method too.

Originally Posted by JohnMarcson

This setup of switches could run almost any built in whelen LED TA. They use the left + right = center out method too.

Rocket-X / RX warning bars have the same method as well.

Originally Posted by tom

Rocket-X / RX warning bars have the same method as well.

As do 911EP.

how would a whelen LED T/A wire up to 3 switches? don't you need the control box? my old 911ep would do this flawlessly...but I'm not too sure about my 6head Tir6 T/A. (was wired to a whelen control box, now wired to a SS2000SM)

Originally Posted by Storm4200

how would a whelen LED T/A wire up to 3 switches? don't you need the control box? my old 911ep would do this flawlessly...but I'm not too sure about my 6head Tir6 T/A. (was wired to a whelen control box, now wired to a SS2000SM)

Just sell the tir6 bar to me and buy an E66 and you're good to go.

Originally Posted by Fast LT1

Just sell the tir6 bar to me and buy an E66 and you're good to go.

hahaha. no thanks. i LOVE the TIR6 bar hooked up to the ss2000sm

Originally Posted by Storm4200

how would a whelen LED T/A wire up to 3 switches? don't you need the control box? my old 911ep would do this flawlessly...but I'm not too sure about my 6head Tir6 T/A. (was wired to a whelen control box, now wired to a SS2000SM)

Depends on the model. This will only work with arrows that have their own patterns that use the 1 left, 1 right, both center out style switching.

Originally Posted by JohnMarcson

Depends on the model. This will only work with arrows that have their own patterns that use the 1 left, 1 right, both center out style switching.

nah, mine isn't like that...