Thread: Cencom wiring

On a cencom it says fuse the 2 8ga wires at 50 amps each,how are ya'll doing this? Do you use a block like this Stinger SPD5625 Four Position Fused Distribution Block Car Audio - SPD5625.

A fuse block will be on another fuse also.






I bought a cencom red without any wires. I think I found the anderson connectors I need. Tell me if I'm wrong.
10 ft. 8 gauge Power Supply Cable with 75 amp Powerpoles [PSC-08] - $18.99 This would be for the power comming in and but another one for the 40 amp outlet.

Powerpole to Bare End Adapter [PP-2-Bare] - $6.99 I would get 2 of these for the 2 20amp outlets and system power

If anyone has the pieces to add the TA function or other wires let me know.

Thanks
Andrew

Are you looking to add the T/A board to your CenCom? If so, you could probably talk to a Whelen distributor and order it.

If you need the wires for the T/A, I bought mine from this guy:

12 PIN CABLE PLUG FOR TRAFFIC ADVISOR CONTROLLER ARROW | eBay

He also has just the connector and pins if you want to crimp directly onto your T/A.

Ok thanks, I have looked into this guy and will probably order from him.

Originally Posted by amccullers

I bought a cencom red without any wires. I think I found the anderson connectors I need. Tell me if I'm wrong.
10 ft. 8 gauge Power Supply Cable with 75 amp Powerpoles [PSC-08] - $18.99 This would be for the power comming in and but another one for the 40 amp outlet.

Powerpole to Bare End Adapter [PP-2-Bare] - $6.99 I would get 2 of these for the 2 20amp outlets and system power

If anyone has the pieces to add the TA function or other wires let me know.

Thanks
Andrew

I had your same problem i used the 75 amp power pole connectors
Anderson Powerpole 75 Amp Power Pole Kit 6 Awg Wire | eBay

and i used these for the 2 smaller ones
Anderson Powerpole Sermos 30 Amp Kit Power Pole 10 Pairs | eBay

try these if you havent found any yet.

If anyone could help me, I just need the cable that runs from the control head to the brain...THATS IT. Help??

Originally Posted by amccullers

I bought a cencom red without any wires. I think I found the anderson connectors I need. Tell me if I'm wrong.
10 ft. 8 gauge Power Supply Cable with 75 amp Powerpoles [PSC-08] - $18.99 This would be for the power comming in and but another one for the 40 amp outlet.

Powerpole to Bare End Adapter [PP-2-Bare] - $6.99 I would get 2 of these for the 2 20amp outlets and system power

If anyone has the pieces to add the TA function or other wires let me know.

Thanks
Andrew

Originally Posted by tbone745

If anyone could help me, I just need the cable that runs from the control head to the brain...THATS IT. Help??

Have you tired Mother Whelen? its a funny plug not sure where you would find it

I can't even find parts for this sucker anywhere online (even Whelens website)other than the mic ext cable.....I'm surprised nobody has the mic for a Cencom on here they're willing to sell to me. I NEED ONE! lol I'll end up callling them as I wanna add the traffic advisor to mine to use on my liberty.

Originally Posted by Dave

Have you tired Mother Whelen? its a funny plug not sure where you would find it

New question