Search results

I mean, it's only been a measly 8 years since it was started.

Honolulu PD used this exact setup on their Liberties for years. Not sure if they've upgraded to different bars since 2011, but I distinctly recall seeing them using Blue/Amber split TAs on the rears of their bars. They were also the first department I'd ever seen actively use the "cruise"...

This is the Whelen "ModuFlash" pattern. Set each of your heads to the pattern, then use the phase/delay settings to adjust the sequencing of heads (1, 4, 2, 3, etc.)

PM sent.

*BUMP* Still looking for these. Found a complete harness set on eBay with an identical WeCan board, but I'd rather not have to fork over $200 for the whole thing when I only need the wiring harness.

I need the internal wiring harness for the takedowns and alleys for a Liberty WeCan model. I specifically need the plug more than anything, as I upgraded my 48" low-current bar to a 54" WeCan bar, and while the LC wiring for the front/rear/TA lights worked straight across, the existing TD/Alley...

Update: Found one on Amazon that isn't Whelen's part, but is identical.

I've got a CenCom Sapphire I'm trying to wrap up an installation for, and the only thing missing is the WeCan wire plug for the lightbar cable. Anyone got one? Can't find anything online readily available or nearby.

I have a pair of housings for those, but the only lights I have are a pair of 500 series TIR6s in red that are fairly old, or a pair of older red LIN6s. If you're interested, holler at me. Probably let 'em go to you for decently cheap.

Wiring and connectors FOUND for the CenCom Sapphire.

PM sent!

Is this 150 for the pair or per piece? Of its for the pair, I'll take it.

Updated original post. My needs are now more specific to items related to the Sapphire, and not the entire set itself.

I sold my 295SLSA6, so I need to replace it with something. I figured I'd upgrade, so I'm looking for a CenCom Sapphire or CanTrol WC. Update: In search of some gently-used Red Ions and/or LINZ6s. Regular ones are fine, don't need to be wides or surface mounts, but I'll consider wides. I have...

Oh man, if you still have this, I just might take you up on it. Is this is the earlier model that has the actual "Q" sound on it, not the "we had to change it because Federal sued us over the sound" garbage tone?

With ALPR, you don't have to do it. It's done for you, automatically, in real time, and it does it relatively instantaneously. Five minutes as compared to five seconds is a HUGE difference. Plus, it logs time, date, GPS coordinates, AND a photo of the plate and some of the vehicle (if not all...

By the time you're in the intersection, people need to have already have seen you coming from a perpendicular direction (you have to be seen before getting to the intersection in order to effectively clear it). If there are vehicles between you and people on perpendicular roads, they won't see...

In my experience doing installations with alarms and remote start systems, rarely do OEM wiring grounds run back to the BCM (emphasis on "rarely). I did this with Vertexes in '02 Silverado with no problems. Just had to drill out the existing hole a little bit, screw them in, and wire 'em up to...

If I remember correctly, the high wire (+) should be the Orange wire, not the brown. While this shouldn't make a difference if you're only using one speaker, if you're using an off-brand speaker, it's possible that reversing the phase of the wires could be affecting operation. 16-gauge wire...

All of Whelen's software is setup to check their servers for a couple of things (mainly whether it's valid, and if there are any updates that need to be downloaded). Disconnecting your internet returns an error to the software that basically says that the network is unavailable and to open it...

For warning lights, this is acceptable, but used in conjunction with in-car video, MDT/MDC units, and other voltage-/current-sensitive equipment, can lead to line noise and voltage swings across the entire electrical system that may affect how stuff works (especially video systems). My best...

+1. If you're really ambitious, you can even go so far as to make your own housing out of fiberglass/carbon fiber, but that's just opening up a whole different jar of "Reasons Why I Hate Myself and Other Stories of Self Loathing & Misery".

Late to the party on this, but the Liberty II is essentially just an optical redesign of the Liberty, eliminating the 500 series "concept" altogether (which is what they should've done years ago, and the Freedom needs the same thing). The Liberty Independence is, for all intents and purposes...

Good luck with that one. The wire for that is located most likely in one of two places: A) In the column on the connector that hooks up the sense wiring for the shifter itself, or B) On a connector on the BCM under the driver's side of the dash, and you'll have a hell of a time finding it...

Chances are, water is not frying your relays. If the box is (properly) sealed, and the relays are themselves sealed, then either you're overloading your relays, or they're not wired right and are overheating as a result. Honestly, mounting anything electrical underneath a vehicle is asking for...

I took that photo! MNStar Technologies makes it (like everyone said). It's a nylon-composite braid that is done by them in their factory, and you can't buy it anywhere (unless you have it made, thus it is considered proprietary). Good stuff, and it lasts forever.

IT'S SO BEAUTIFUL. :sadcry: But seriously, as a scanner/radio nut, that's a slick setup. //schemes//

+1. They're a million times easier to install than Pro-gard's garbage designs (and lack of quality control), and they've actually gone to great lengths to make sure their stuff fits the vehicle being used in each install. If it weren't for the fact that Setina is on the west coast and thus...

I can't wait until JazzDad Industries begins making fire apparatus and ambulances! Because everyone needs 300-foot extension ladders with 80-foot stay poles!

The Pan & Tilt is slick, but needs some work. Whelen is set to do a re-design of the whole thing in the next year, so keep your eyes peeled for that. I've heard that there will be an app (but don't quote me on that), in addition to some other ideas.