Search results

I like the Chevrolet Caprice with Ford hub caps ‍♂️

Possibly this one? From a 1994 Galls catalog.

Winder Police Equipment in Southgate.

Not sure if this is what they use, but here’s a Code 3 version.

Here’s a color pic of it in a 1999 Galls catalog I found at my department.

Not to be off track from what you're looking for, but this was done back a few years ago in Saginaw County Michigan. Interesting mounting system and lighting setup.

Found it! Here's the manual for the Whelen WS-227A. Hopefully it loads. Feel free to copy to the Vintage Whelen area as well

I might have a copy of the install guide in the archives at my department that Whelen sent us some years back. We used the WS-227A in conjunction with our Edge 9000's back in the 80's. I'll check and forward it to you if I can locate it

We have one DVM 500+ and one DVM 800HD. The 800HD is garbage. The VuVault Software is the most user un-friendly I've dealt with yet. The old Video Manager Software was easier to navigate through and was on a CD. The VuVault Software doesn't come on a CD and is remotely loaded on you desktop...

POV on left is a much better pattern.

In the second (2nd) picture, the "two pin plug" is tied into the trunk latch switch. It's for the trunk mounted lights. I'll check on our Impala 9C1 on the orange & yellow wires next time I'm at the dept. In the first (1st) picture, I'm guessing that's in the passenger foot well fuse panel? If...

Adamson Industries. https://www.adamsonindustries.com/template/flipbook/index.html?page=74 I recently ordered a couple strobe tubes from them. They might not be in-stock, but they can typically get them. Mine took about 3 weeks to get, but I still got them. If the link doesn't work, go to...

I drive a 2016 PPV 9C1 with the Setina push bumper and the double wraps. No wobble on paved roadways or gravel two-tracks. Have warning lights, off-road lights and speaker to add to the weight. I see its mounted to the area where the tow-hooks would ordinarily be located. Might need to...

Not sure if it'll help, but the pdf is attached for the Federal Signal OSHP Vista. It does mention the "Man Down" (blue LED) and gray wire on page 3, 4 & 5. Got it off Federal Signal website.

Thanks for the reply. That's the route I went. Needed to buy the "terminated wire" from GM ($7.95) as it wasn't included with the up-fitter wiring. It dims the backlighting down to the lowest setting (doesn't actually black-out the lighting) & disables the parking lights when the remote start...

Feel free to locate question to another forum if not posted in right area. Just recently got a Chevrolet Tahoe PPV and see that when the headlamps are off the dash backlighting goes to full intensity (total officer safety issue in my book). They won't dim with the dimmer switch when the...

Looks like a Kustom Electronics (Signal) MR7

do you have at least one user set up and have you deleted the .hex off the cf card? I have no knowledge of the stalker brand radar but some kustom radars required a gateway box to use with the digital alley cameras. which model camera are you using? we run the 500 plus.

The VSS or VSO is the orange 20ga. wire in the right front footwell. It is in the same "loom" or "mess" of wires for the Radio Mute (white wire), Hot out of Park (yellow/black), Hot Start Run (pink/blue) & Hot Accy Run (brown). Hope this helps.

have a cm300 vhf that does that after releasing the PTT button on the mic. believe it can be programed in/out in the software.

Depending on what manual your looking for try this link: Whelen Literature Locator

I've ordered batteries and various accessories from Battery Zone. They are quick and have better than OEM stuff too.

Right on! 2000 9C1 has the same wire. Green w/Red stripe.

I prefer the Kustom Golden Eagle model radar with the remote kit. I mount the counting unit (brains) out of sight in the radio console and the display on the top of the steering wheel. One wire partially visible but that's it.

Great siren's when used with the original Edge 9000 lightbars. I used the WS-227A with the lighting controls and work flawlessly for 15+ years until we upgraded to LED.

very nice job, great tribute!

I'd use the Pasco County Caprice if I had the choice.

whelen bought out austin electronics. I have a ws-224. I'll check the tag under my circuit board for a date. I also have the install manual or if you need one, I called whelen and they e-mailed it to me. They were nice compact units in the mid 1980's when used injunction with the edge 9000's...

not a bad looking cruiser, but about that push bumper....

yep, not working for me either.