Search results

  1. Scoot163

    Whelen Liberty Duo WC and Whelen Liberty WC- Assistance Please!

    Maybe so! All of a sudden the driver front patterns began working and wait for it, now the driver's side rear stopped working. Should I try reprogramming it with the new Command software, or stick with the older WeCan program? The bar was made in 2011. The control module in 2018.
  2. Scoot163

    Whelen Liberty Duo WC and Whelen Liberty WC- Assistance Please!

    Programmed the WC module and the bar lit up.... except for the lights on the driver's side front and rear. Flash patterns only worked on the left. Driver's side alley wouldn't even light up. The traffic advisor function works on both sides. Is this a glitch anyone is familiar with...
  3. Scoot163

    Whelen Liberty Duo WC and Whelen Liberty WC- Assistance Please!

    Okay, the WeCan module I purchased has a date of 1/19 on it.
  4. Scoot163

    Whelen Liberty Duo WC and Whelen Liberty WC- Assistance Please!

    Thanks, I downloaded the WeCan software last night, although it said it was out of date. Should I download the latest version of Whelen Command instead? I should be able to do this, but will PM you if I have further problems.
  5. Scoot163

    Whelen Liberty Duo WC and Whelen Liberty WC- Assistance Please!

    Thanks Tony! But how do I create the file? Do I just name a folder in my documents? Heading to bed now but I'll be back on in the morning.
  6. Scoot163

    Whelen Liberty Duo WC and Whelen Liberty WC- Assistance Please!

    I am a mechanical rotator, halogen light guy. I was given the above Liberty bars to work on, one to keep, the other for the guy who gave them to me. Tony gave me some help in another thread, ( starting a new one 'cause I felt I was hijacking the other), so I bought a WeCan controller module...
  7. Scoot163

    Whelen Liberty II series help.

    Thanks, Tony! I think I've got it now. Just have to find a couple of good used Modules. Or buy new on Ebay.
  8. Scoot163

    Whelen Liberty II series help.

    Ok So I have a Federal Signal SS2000 switch and brain. Do I just connect the switch to the WeCan module with the phone cord? or do I just program with the WeCan and then connect the trigger wires to the Federal Signal brain box?
  9. Scoot163

    Whelen Liberty II series help.

    Glad I found this thread as I have the same questions as the original OP. I received two Liberty lightbars and being an old school lightbar guy couldn't figure out why it wasn't working. Do I have to use a Whelen specific switchbox? And how does the WeCan module connect to the switchbox? Any...
  10. Scoot163

    Running 12v DC equipment on 120v AC (indoors)

    I use the Powermax extensively and have six or seven of them for my collection. I enjoyed your video, and noticed that you mentioned that the Powermax supply you have fluctuates in power output after awhile. It is a three stage charger and is made to do that for battery maintenance. The newer...
  11. Scoot163

    Twinsonic lightbar with Unitrol Series 800 controler

    The switches can be used to activate other small amp lights like alley lights or take down lights. The switch that "springs" back into place is called a momentary switch. It can be used for electric gun releases, to change light modes etc. The Unitrol is not a radio. As Wailer stated, if...
  12. Scoot163

    Twinsonic lightbar with Unitrol Series 800 controler

    The 800 switch box is pretty bullet proof. It's just the way the previous owner had it wired up. Position three should turn the siren on with the lights if the selector knob is turned to "Auto". Otherwise turn the knob to manual and the siren won't come on with the lights. It's all in how...
  13. Scoot163

    Positive Positive Purchase from AuroraBorealis

    Great transaction. Bought a nice CTS dome from AuroraBorealis. Smooth transaction, great communication, and fast delivery. He is a great member here and I would do business with him again in a heartbeat.
  14. Scoot163

    PowerMax 60A 3-stage/fixed output switch broke

    If you have decent soldering skills and can find an equivalent switch you could replace the switch. But I'm sure that would void the warranty. I had a PowerMax fail 6-7 years ago while still under warranty. Their customer service talked to me and in fairly short order they sent a replacement...
  15. Scoot163

    Positive Bought Positive from Stampeed Valkyrie

    Bought two Aero transmission gear assemblies from Rob. As usual, great communication and a flawless deal. Top notch member!
  16. Scoot163

    Beacon Ray 176-A Question

    Thank you sir, I really appreciate that!
  17. Scoot163

    Beacon Ray 176-A Question

    I found this 176-A in an antique store in Tucson. Great shape, and runs really well. It is badged as a 17-A. I’ll get a replacement tag for it. Does anyone know the pipe and thread size that these were mounted on? I'm going to make a stand for it, just would rather not take the light to the...
  18. Scoot163

    Aerodynic Assistance

    Ok, I have identified that one of the rotators next to the belt gear is binding. They all should have a bit of a "bobble" and a small gap between the black gear and the nut that sits on top of the mounting tray. This one doesn't. Is there a way to adjust the nut below the gear to give it less...
  19. Scoot163

    Wanted Need Aerodynic Clutch Gear Shaft

    Ok, thanks!
  20. Scoot163

    Wanted Need Aerodynic Clutch Gear Shaft

    This is what I am looking for. With the black clutch gear on the far left.
  21. Scoot163

    Aerodynic Assistance

    This is what I'm looking for. But with the black clutch gear on the far left.
  22. Scoot163

    Wanted Need Aerodynic Clutch Gear Shaft

    I will post a photo tomorrow, and thanks for looking. I would PM but it says I cannot PM because I have too many messages. Not sure why you are saying you are lost? Neither post mentions the bar being an Aerotwin that I can see. But then again, I can't see far! Thanks again.
  23. Scoot163

    Aerodynic Assistance

    Definitely not an Aerotwin. The gear was new and had never been used. I'll keep tinkering with it, just don't want to ruin any more gears!
  24. Scoot163

    Wanted Need Aerodynic Clutch Gear Shaft

    Thanks! It might be too early of a version. But I will take a look! Appreciate it!.
  25. Scoot163

    Aerodynic Assistance

    I am restoring an Aero 24 EH. I've done quite a few of these, but for some reason this one is being annoyingly difficult. Or maybe I'm just getting older and don't see the obvious like I used to. Old style gear in the motor cage. Thought I had everything set up pretty well, put power to...
  26. Scoot163

    Wanted Need Aerodynic Clutch Gear Shaft

    I need the later model Aero transmission shaft that works with the clutch gear. The shaft should have a notch in it for the clutch gear E-clip to fit into, and on the bottom the black gear that meshes with and drives the rotators. I would also buy the whole motor cage/transmission assembly...
  27. Scoot163

    Positive Bought Positive from Shues

    Another great transaction with Shues! Purchased a Code 3 700 flasher from him. Very fast delivery! Great communication as always!
  28. Scoot163

    A slightly different Streethawk?

    I have an all blue Streethawk with blue forward facing strobes. My department used them for two years before moving on to the MX. Maybe not the most effective but it was a cool looking bar for the time.
  29. Scoot163

    Code 3 MX7000 700 Flasher

    Thats what I thought my dinosaur brain recalled. Thanks, gents,
  30. Scoot163

    Wanted Code 3 700 Flasher

    I need a Code 3 700 flasher, working and lightly used if possible. The 710 and 711 will not work for my particular application. Thanks!

Forum Statistics

Threads
53,962
Messages
449,805
Members
19,102
Latest member
Hilux01

About Us

  • Since 1997, eLightbars has been the premier venue for all things emergency warning equipment. Discussions, classified listings, pictures, videos, chat, & more! Our staff members strive to keep the forums organized and clutter-free. All of our offerings are free-of-charge with all costs offset by banner advertising. Premium offerings are available to improve your experience.

User Menu

Secure Browsing & Transactions

eLightbars.org uses SSL to secure all traffic between our server and your browsing device. All browsing and transactions within are secured by an SSL Certificate with high-strength encryption.