turboboost
Member
Hello,
I know that this thread is about parts but it's also vintage, and as I've seen some parts requests in this section, I've finally decided to post here. If the moderators decide to relocate this thread in the "Parts Wanted" section, I appologize for the mistake.
Here are the pics of the parts I need to restore my aerodynic 24SEAH:
- aerodynic Terminal strip 7 terminals (number 45 in the fedsig 24A, 24AH, 24E, 24EH, 24EA, AND 24EAH aerodynic parts list. I don't need number 44 as it's the same for 5 or 7 terminals strips).
- 1 mounting plate with 2 welded threads as in the pics below. This mounting plate slides into the aerodynic frame and the 2 threads into the black brackets of the bellow pics. It allows to attach the roof mounts to the lightbar. I need just one plate w/ 2 threads and the 4 bolts as I already have one side (the one pictured...).
- the ending parts (all the bolts, washers...) of the curved aerodynic gutter mounts. I need 4 of them. I already have the curved bar.
See below pics of the parts I need.
Thanks guys for your help.
I know that this thread is about parts but it's also vintage, and as I've seen some parts requests in this section, I've finally decided to post here. If the moderators decide to relocate this thread in the "Parts Wanted" section, I appologize for the mistake.
Here are the pics of the parts I need to restore my aerodynic 24SEAH:
- aerodynic Terminal strip 7 terminals (number 45 in the fedsig 24A, 24AH, 24E, 24EH, 24EA, AND 24EAH aerodynic parts list. I don't need number 44 as it's the same for 5 or 7 terminals strips).
- 1 mounting plate with 2 welded threads as in the pics below. This mounting plate slides into the aerodynic frame and the 2 threads into the black brackets of the bellow pics. It allows to attach the roof mounts to the lightbar. I need just one plate w/ 2 threads and the 4 bolts as I already have one side (the one pictured...).
- the ending parts (all the bolts, washers...) of the curved aerodynic gutter mounts. I need 4 of them. I already have the curved bar.
See below pics of the parts I need.
Thanks guys for your help.
Attachments
Last edited: