Replace the ocilaser with Whelen LED

[24-610]

Hey guys what Whelen LED head will closest fit in the space in our rescues grill to replace the old code 3 ocilasers? Thanks, D

 

[fire1]

Hey guys what Whelen LED head will closest fit in the space in our rescues grill to replace the old code 3 ocilasers? Thanks, D

The ocilaser is about 5.5 X 4, the whelen M4 is 5.5 X 3 3/8 or the M6 is 6 3/8 X 4

 

[grfd711]

If it's a custom chassis, it will most likely have the KD headlight bezel, meaning each spot is a 4x6, which Whelen, FedSig, Code 3, PowerArc, Tomar and Weldon make a 4x6 LED that will fit in that spot. I've done the swap on my paid FD's first out engine, as it had the Sylvania halogens and were replaced with Whelen 600 series lightheads.

 

[SlickTop Solutions]

If you like the look of the Ocilaser, but want upgrade to an LED light, look at the Optilaser (LED Version) by Code3.


Code 3 Fire & EMS > OptiLaser

 

[TritonBoulder47]

I'll take the oscilasers...

 

[Andy L.]

If they aren't in the headlight bezels the Whelen 600 with a flange or M6 with the 600 series adapter flange both work great.

 

[shues]

If it's a custom chassis, it will most likely have the KD headlight bezel, meaning each spot is a 4x6

replaced with Whelen 600 series lightheads

If you go with Whelen 600-series lightheads, be sure to order an equal number of 6EHDLTMK. The 6EHDLTMK is a bracket that allows a 600-series lighthead to be mounted in the headlight housing, in the place where the Oscilaser was. This comes as a result of the Oscilaser having its own housing that replaces the headlight bucket and aiming hardware.


See here, among other places: http://www.whelen.com/pb/Automotive/Catalogs/Lighthead%20Mounting-Catalog.pdf

 

[RL1]

I've seen a guy put 2 tir3's in the ocilaser housing.