Recent content by militarymedic23

  1. M

    HHS3200 horn ring

    another success. only thing I did was remove the T1 and T2 events. Even though when I looked through them it didn't make sense of what they were trying to do that would have made the 2 buttons act the way they did. I have a feeling these buttons were also what was causing me to think the PTT...
  2. M

    HHS3200 horn ring

    No worries. I’ll take a look tonight and see if anything looks odd in my limited understanding. And I’ll try and mess around with the back lighting and see how far I get
  3. M

    HHS3200 horn ring

    Also, if you happen to have my config file open, can you see if anything looks odd with the manual and airhorn buttons to lower left and lower right on the handheld unit? I don’t have my laptop handy at the moment. But when I was on the highway and this trying to cycle through things I pressed...
  4. M

    HHS3200 horn ring

    I do have an extra button, maybe it would be easier to do that when mess around with more wiring. But if I'm using the actual backlight activate wire, wouldn't I set it that way vs every button individually? And if I do it that way, do the individual backlight options override the overall...
  5. M

    HHS3200 horn ring

    ah so maybe my 50% setting wasn't enough to really show a difference... So what input are you referring to on the headlights? Right now I have both the backlight and the ignition activated like I had on the 2200. Although on the 2200 I don't think there was any option to dictate the...
  6. M

    HHS3200 horn ring

    It seems that even though the Command software includes the HHS line, it's so feature packed that it's almost overkill to program just the basics. But that's whelen so............. My setup is nowhere near fleet level so as fun as it would be to tinker with those type of products I simply...
  7. M

    HHS3200 horn ring

    Got it. I’ve watched a few of the trainings but not enough to really get a grasp of the functions yet. I’m one of those people who might watch it 100 times but until something else clicks to bring it together or apply it in a way that makes sense to me it will continue to be a vague concept. i...
  8. M

    HHS3200 horn ring

    Success!!!! Hooked up the horn and put into the horn ring activation wire directly and bingo it works perfectly fine. On a sidenote do you have a simpler translation of next state that the virtual inputs use, that is a little more straightforward and how whelen defines it? I’m having a hard time...
  9. M

    HHS3200 horn ring

    I was searching on the dual tone aspect and I discovered a post here by andrewsim. https://elightbars.org/forums/threads/is-there-a-good-link-for-over-the-top-chief-vehicles-etc.85479/page-2 pretty much spells out that the main controller can only output one tone at a time. have to have a...
  10. M

    HHS3200 horn ring

    Complicated is an understatement! As much as the 2200 has its issues the software was a lot easier to work with. I’ll continue tinkering on this and reply back with what I find out.
  11. M

    HHS3200 horn ring

    Thank you for looking at that. i has started messing around with the output 9 after I sent the file but stopped since I didn’t know if I was even heading in the right direction. I’ll continue testing since it looks like I was heading in the right direction but if I can’t get the output 9 to...
  12. M

    HHS3200 horn ring

    Roger that. Thanks for the confirmation.
  13. M

    HHS3200 horn ring

    Another thought on this, if the horn 12v unit will go straight to the activation wire on J8, does that actually free up output 9 to be used as another regular output?
  14. M

    HHS3200 horn ring

    The speakers are hooked up right since I can get the unit to produce tones I’ve signed to other buttons. So I know that’s working. I’ll have to check the volume adjustment too. Never touched it yet but maybe it was accidentally turned down. and I’ll check the outputs like you mentioned. thanks
  15. M

    HHS3200 horn ring

    But if you do have a minute to look at my config on Monday, that would be awesome. I think the version I included is before I started messing around with much on the horn side, so it might be a better route instead of trying to understand what I possibly messed up! If you could also see if...

Online statistics

Members online
19
Guests online
355
Total visitors
374

Staff online

Forum statistics

Threads
49,538
Messages
428,377
Members
17,748
Latest member
Guns4hire03

Secure Browsing

Top Bottom