I added LR11s to my liberty alleys. The left went in and works just fine. When I plugged in the right one and slid it in it turned on by itself... The cencom gold was powered down. I unplugged it, slid it out and back in. I turned on the system and turned it back off. Plugged in the LR11 again and bolted it down with no issues. It worked as it should for about a day on all three slide positions and with the right alley button. Now it turns on with the system when I activate it as it should but it is VERY dim, barley on. Is this a bad ground? All the other modules work perfectly except my right alley.