Search results

  1. M

    HHS3200 horn ring

    another success. only thing I did was remove the T1 and T2 events. Even though when I looked through them it didn't make sense of what they were trying to do that would have made the 2 buttons act the way they did. I have a feeling these buttons were also what was causing me to think the PTT...
  2. M

    HHS3200 horn ring

    No worries. I’ll take a look tonight and see if anything looks odd in my limited understanding. And I’ll try and mess around with the back lighting and see how far I get
  3. M

    HHS3200 horn ring

    Also, if you happen to have my config file open, can you see if anything looks odd with the manual and airhorn buttons to lower left and lower right on the handheld unit? I don’t have my laptop handy at the moment. But when I was on the highway and this trying to cycle through things I pressed...
  4. M

    HHS3200 horn ring

    I do have an extra button, maybe it would be easier to do that when mess around with more wiring. But if I'm using the actual backlight activate wire, wouldn't I set it that way vs every button individually? And if I do it that way, do the individual backlight options override the overall...
  5. M

    HHS3200 horn ring

    ah so maybe my 50% setting wasn't enough to really show a difference... So what input are you referring to on the headlights? Right now I have both the backlight and the ignition activated like I had on the 2200. Although on the 2200 I don't think there was any option to dictate the...
  6. M

    HHS3200 horn ring

    It seems that even though the Command software includes the HHS line, it's so feature packed that it's almost overkill to program just the basics. But that's whelen so............. My setup is nowhere near fleet level so as fun as it would be to tinker with those type of products I simply...
  7. M

    HHS3200 horn ring

    Got it. I’ve watched a few of the trainings but not enough to really get a grasp of the functions yet. I’m one of those people who might watch it 100 times but until something else clicks to bring it together or apply it in a way that makes sense to me it will continue to be a vague concept. i...
  8. M

    HHS3200 horn ring

    Success!!!! Hooked up the horn and put into the horn ring activation wire directly and bingo it works perfectly fine. On a sidenote do you have a simpler translation of next state that the virtual inputs use, that is a little more straightforward and how whelen defines it? I’m having a hard time...
  9. M

    HHS3200 horn ring

    I was searching on the dual tone aspect and I discovered a post here by andrewsim. https://elightbars.org/forums/threads/is-there-a-good-link-for-over-the-top-chief-vehicles-etc.85479/page-2 pretty much spells out that the main controller can only output one tone at a time. have to have a...
  10. M

    HHS3200 horn ring

    Complicated is an understatement! As much as the 2200 has its issues the software was a lot easier to work with. I’ll continue tinkering on this and reply back with what I find out.
  11. M

    HHS3200 horn ring

    Thank you for looking at that. i has started messing around with the output 9 after I sent the file but stopped since I didn’t know if I was even heading in the right direction. I’ll continue testing since it looks like I was heading in the right direction but if I can’t get the output 9 to...
  12. M

    HHS3200 horn ring

    Roger that. Thanks for the confirmation.
  13. M

    HHS3200 horn ring

    Another thought on this, if the horn 12v unit will go straight to the activation wire on J8, does that actually free up output 9 to be used as another regular output?
  14. M

    HHS3200 horn ring

    The speakers are hooked up right since I can get the unit to produce tones I’ve signed to other buttons. So I know that’s working. I’ll have to check the volume adjustment too. Never touched it yet but maybe it was accidentally turned down. and I’ll check the outputs like you mentioned. thanks
  15. M

    HHS3200 horn ring

    But if you do have a minute to look at my config on Monday, that would be awesome. I think the version I included is before I started messing around with much on the horn side, so it might be a better route instead of trying to understand what I possibly messed up! If you could also see if...
  16. M

    HHS3200 horn ring

    I'm actually fine with having the horn input tap receive input directly. I already have a switch in place to allow the the horn source to be switched between the whelen unit and regular vehicle horn. for the config part, I think I get what you are saying but to clarify: The only area I could...
  17. M

    HHS3200 horn ring

    ok so I have that right, but in comparison to the 2200, there was none of this connect #12 to input 4. I had the input from the horn going straight into the horn ring activation+. worked fine. For the 3200, it seems WHT/BLU receives the actual 12v+ to activate the horn, then passes it on to J8...
  18. M

    HHS3200 horn ring

    I don’t have the park kill feature hooked at all so it shouldn’t matter about the gear. i intercepted the horn ring wire pretty much right before the horn in the front of the truck. On the 2200 I swear it was on positive activation so that is what I matched for the 3200.
  19. M

    HHS3200 horn ring

    Question for folks who have installed the 3200 unit or if other siren units use the same general wiring theme: I'm thinking this is a combination of the wiring and the software config, of which I'm still blindly trying to figure out. instructions were followed to use the default output 9, fuse...
  20. M

    HHS3200 config question

    Thanks for the config file. I think it's lining up with what I'm doing now. Best way I learn is simply trial and error. so when this unit every comes in, I'll probably spend the better part of an afternoon adjusting things once I see how the unit is behaving in the vehicle.
  21. M

    HHS3200 config question

    I did look at the default config and I think I’m grasping how things are set up. Barely. Does anyone have some words of wisdom about how the virtual events makes sense?
  22. M

    HHS3200 config question

    Ah, so I’m not the only one that has a bit of frustration was trying to figure out how this software works...
  23. M

    HHS3200 config question

    or as another avenue, is anyone willing to send over a config file of an existing config so I can see how it looks in the command software?
  24. M

    HHS3200 config question

    Ended up going for a 3200 unit I was asking about earlier. Trying to get some config stuff done ahead of time but the learning curve from the 2200 to 3200 software is proving a bit hard. For the sake of familiarity I'm trying to mirror over the settings from the 2200. The hiccup I'm running...
  25. M

    HHS3200/4200 TA feature

    No worries. I see a few Whelen TA sticks available which follow the wiring that has been described here. But if what I have works, just controlled by a separate controller. Don’t see the need to go out and buy a whole new arrow stick just so the HHS unit can control it.
  26. M

    HHS3200/4200 TA feature

    Hmm, so if this is the general way lightbars do their TA wiring, would this be kind of a mute point to look into or try and configure with the majority of the standalone TA’s? I have a TACTLD1 that is controlling my current arrow stick. don’t see anything in the wiring that would allow 2...
  27. M

    HHS3200/4200 TA feature

    Ok, I think I’m following. But to give a bit more for a visual aid, are there specific TA models I can lookup and see the wiring details?
  28. M

    HHS3200/4200 TA feature

    Hello, Hello, Looking at purchasing a HHS3200 unit, but had a question on a function I’m not quite understanding from the install instructions. I sent this off to Whelen but wanted to post it here to for more feedback. On the handheld remote, the option for TA Display seems to activate...
  29. M

    Ford F150 2018 wiring install question

    Hello, Wanted to ask what others have found as the ideal location for running wiring into the cab on the 2017, 2018 model F150s. Transitioning to probably a 2018 F150 and have a HHS2200 Whelen unit I'd be bringing over to use in this vehicle. I'm guessing it would secure nicely in back of the...
  30. M

    Hhs2200 horn ring activate output

    Would anyone happen to know if the horn ring input can activate other outputs? An example, horn ring activates output X as 8 second momentary.

Online statistics

Members online
13
Guests online
346
Total visitors
359

Forum statistics

Threads
49,538
Messages
428,377
Members
17,748
Latest member
Guns4hire03

Secure Browsing

Top Bottom