Search results

  1. FusionWolf

    Ford/whelen PTW flasher pinout

    Hey there sorry to hear that flasher died on you. I believe the pin out is the same
  2. FusionWolf

    For Sale Several items for sale

    Hey there if that outer edge is available I'll take it
  3. FusionWolf

    Liberty Lightbar Issue

    to me... check all your connections and wiring since its added after he fact- second check your programming: was it programmed in the original software then reprogrammed in command? rule out the obvious first. after that it could be a heat issue or a I/O board with a occasional issue to me with...
  4. FusionWolf

    Dummy Dual Color Hideaway

    Would definitely be about time they are way behind on a dual color Hideaway. I know they have a pdf manual for them but was back in 2016
  5. FusionWolf

    Wanted Feniex cannon A/W v2

    Looking for 2 feniex cannons v2 in amber/white
  6. FusionWolf

    Dummy Dual Color Hideaway

    Hey all, is anyone familiar with a dual color hide away that can be used with carbide? I know fedsig makes some but sadly doesn't look like they come in Amber/White. Anyone know of a product that will work? If I can find some v2 cannons I know those will be fine but those are hard to come by.
  7. FusionWolf

    Hella HERO hideaway OE bulb replacement. Whelen HALO Reincarnated!

    A question on the hero and flex series. With integration into the factory turn signal will these require load resistors to prevent hyper flash when the factory turn signals are activated?
  8. FusionWolf

    A Cautionary Tale: Goo Gone and Feniex Lenses

    this is good to know. I may have to give this a try next time I do feneix lenses because goo gone is no longer an option. Never had any issue with goo gone and other manufacturers
  9. FusionWolf

    A Cautionary Tale: Goo Gone and Feniex Lenses

    Things I learned today. Goo Gone will literally start to dissolve your Feniex lenses. Now I cant speak to all of Feniex's products just the cobra T6s I was using them on. I had some spray tint on the modules of my custom made interior bar and I wanted to remove it as the new tinted windshield I...
  10. FusionWolf

    Official "Whacker" or "Screwed Up Install" Thread

    In general someone who has more lights than the firetruck, someone who's light setup costs more then the car it's on, or esp someone who has no need for lights but will find the loophole in the law that allows them to have them. For me this also goes into the people who buy used cvpis and NGPIs...
  11. FusionWolf

    Official "Whacker" or "Screwed Up Install" Thread

    Oh man we've found our way into the zombie response vehicle area now... but ya know..... i cant be all that mad about that mini cooper.
  12. FusionWolf

    Upfitters in my area?

    Hey Froom- I'm southern MA by the RI Line but travel all over. Always down to lend a hand if needed
  13. FusionWolf

    Official "Whacker" or "Screwed Up Install" Thread

    Oh My GOD! I went to high school with this clownshoe. He has NEVER been a firefighter and his "Security" was driving around a farm where we as teens use to have bone fires by a lake. If I'm not mistaken he got cited for trespassing and driving around the property with his lights on years after...
  14. FusionWolf

    Sapphire inoperable

    check your programming. do you have a lightbar programmed into the system? This has happened to me multiple times with my Cantrol when the expansion module i have isn't communicating properly. when they don't communicate properly my control head is inop.
  15. FusionWolf

    Wanted feniex cannon v2

    looking for 2 feniex cannons 2 mode (i believe these are the ones that work fine with external flashers) but looking for 2 in amber white.
  16. FusionWolf

    FEVER Inc. Eclipse light stick / rocker panel stick

    definitely looking to pick a pair of these up soon. what happened to the the ones that were interleaved with white?
  17. FusionWolf

    Whelen Under-the-Side View Mirror Mount for LINSV2

    not to hijack this thread but what mount are you using in this picture? are these just the regular mounts bend to sit level?
  18. FusionWolf

    2019 F150 Carbide Programming Issue

    This is very possible. I will definitely have to try to swap the input
  19. FusionWolf

    2019 F150 Carbide Programming Issue

    I have unfortunately not been able to get anything just yet. Tomorrow I'm going to be working on it a little bit. I did try what you posted above and it actually creates a delay in all the inputs. I'm not sure if it's a processing delay or conflicting commands right now. I'm not using the...
  20. FusionWolf

    2019 F150 Carbide Programming Issue

    i gotchya. ill have to give that a try
  21. FusionWolf

    2019 F150 Carbide Programming Issue

    So a potential dumb question. What is the difference between the latched input and the regular input
  22. FusionWolf

    2019 F150 Carbide Programming Issue

    I have a 2019 F150 using Carbide with the OBD2 interface. For inputs I have grabbed the brake light and the left and right blinkers from the OBD2 port. On the brake light input these ports I have 2 whelen vertex in the taillights and 2 ions in the back rack in red. Vertexs do brake alert and...
  23. FusionWolf

    Wilson LED conversions - multiple models and repair

    Wilson. Do you know if you're able to convert a Whelen FST duo? looking at one thats Red/clear- Blue/clear. looking to make it all amber clear.
  24. FusionWolf

    Whelen inner edge LP shroud questions

    This is the only info I managed to find but jts essentially just a plastic way mirror integrated into the shroud
  25. FusionWolf

    Mega Thin Buzzing

    Nothing is burnt out on them. And its happening on both. Woukd be bad luck to have two brand new ones come with burnt out diodes. I'm going to try and get a vid of them doing the buzzing when I can next
  26. FusionWolf

    Mega Thin Buzzing

    I have 2 megathins mounted under my tailgate of an f150. The lights are controlled by a carbide and are dual color amber/white. When the lights are flashing amber you can hear a bit of an electronic buzzing with each flash. They are not too loud but noticeable. When the lights are steady burned...
  27. FusionWolf

    2015 Chevy 2500HD Install

    The front looks pretty good. On a personal opinion I do agree that the vipers and lights above the taillights are a bit redundant. If you're not reusing equipment id allocate those funds for some side warning, something along your running boards to make youre your visible 360 along with your 200...
  28. FusionWolf

    20g./6 conductor cable??

    If I need multi conductor I normally go to and use their tray cables. Can select the number of conductors and the Guage you need and the length

Secure Browsing

Search for a Member

Top Bottom