Search results

  1. NoLimitSquads

    Help with programing HHS-4200 and Z-Flash

    I was waiting for somebody to suggest the trash can for that flasher!
  2. NoLimitSquads

    Sappire driving 2 different light bar boards

    Ive noticed that there isn’t a whole lot of Whelen knowledge in this forum. If you use Facehole, there is a Whelen Command group. Somebody would have an answer to this question within minutes.
  3. NoLimitSquads

    WeCan sync?

    Whelen says that you can only run two Wecan devices off of one controller(sapphire, carbide, cantrol, hhs4200). I’ve never hooked up more than two, but in other groups that Im in, they say you can run three devices. Ive only run two inner edges, never two lightbars. If you start a program in...
  4. NoLimitSquads

    Hss4200 & 21 slide

    There is no default setting for that. Every button can be on at the same time. If you want to change this. Select your button, and go to the inputs down below, select your control head, and turn off the buttons that you want that button to turn off.
  5. NoLimitSquads

    Cencom Core Backlighting question

    To me, it still seems like if you had another input with a higher priority than backlight, it wouldn’t matter if the backlight off state disabled it. The higher priority telling it to turn on should have worked.
  6. NoLimitSquads

    Cencom Core Backlighting question

    There are so many updates in command, things that worked a month ago, no longer work. You really have to pay attention now. I was just making a program today, and enabling low power on some outputs, and it was setting low power at 1%. Im glad that you got it figured out. Your solution makes...
  7. NoLimitSquads

    Wanted Wanted: Ford PIU Whelen ION or Micron Shrouds

    The shrouds on the hatch of the older models wont work on 20+. Even with modification, its not an easy task. I might have a 20+ set laying around that came off of a car that I put an inner edge in. Im not interested in selling them, but if you want a part number, Id be happy to help with that.
  8. NoLimitSquads

    Cencom Core Backlighting question

    I would use an input from J6. Hook it to the ignition input. Then you can label that input in your programming as IGNITION SENSE.
  9. NoLimitSquads

    Cencom Core Backlighting question

    Did you adjust your priorities correctly? That is a big deal that often gets overlooked. The input that is on all of the time should have a lower priority than the input that you want to change things.
  10. NoLimitSquads

    Cencom Core Backlighting question

    Ive never used Core without CanBus, so I guess Ive never really checked to see if the ignition sense showed up in ACM inputs. Do you have any extra un-used input wires? You could just tie one of those into the ignition wire. And for everything that I instructed above, use that input wire instead...
  11. NoLimitSquads

    Cencom Core Backlighting question

    Or a much easier way that would probably work. Just click on your ACM input IGNITION, and set your backlight to highpower. Then click the ACM input BACKLIGHT, and set low power. As long as your BACKLIGHT input has a higher priority than IGNITION input, it should be on highpower until the...
  12. NoLimitSquads

    Cencom Core Backlighting question

    Ok. There are a few different ways to do this, but this is how I would do it. Make an event. When ACM input ignition is ON, and ACM input backlight is OFF. Then adjust your backlight to highpower in that event state. Then make another event. When ACM input backlight is ON. And set your low power...
  13. NoLimitSquads

    Cencom Core Backlighting question

    What do you want to trigger your high power? Are you connected to CanBus? Do you have a photo cell?
  14. NoLimitSquads

    Sapphire inoperable

    Core is the main box, like your Sapphire. Core supports WCX. You need a non-WCX control head. Any Whelen control head that isn’t WCX should work.
  15. NoLimitSquads

    Sapphire inoperable

    I don’t think that a WeCanX control head is compatible with Sapphire. I know that Core is compatible with non-WCX, but I don’t think WCX will work with anything but Core. What control head are you using?
  16. NoLimitSquads

    Sapphire inoperable

    Disconnect everything from the WeCan network. Write a quick simple program with no lightbar. Does the error code go away? Does the error code change if you disconnect the control head? Try hooking up your control head with a new cable. And again, make sure that all of your hardware matches the...
  17. NoLimitSquads

    Sapphire inoperable

    Just another thing to check, make sure that you have selected the right control head, not the WCX control head. In this case, I don’t think that the problem has anything to do with the backlight settings. The control head would still turn things on and function. There is an error somewhere. Its...
  18. NoLimitSquads

    Sapphire inoperable

    That screenshot is in the preset menu when selecting your hardware. If your program is already built, with the correct control head, you can’t go back and change those presets. The backlight is turned on or off in the outputs menu under your control head.
  19. NoLimitSquads

    Sapphire inoperable

    If the backlight wire is hooked up, you shouldn’t have to turn it on in command. It is turned on with a preset in the command software.
  20. NoLimitSquads

    Equipment Platform

    This is how I do pickups that have back seats.
  21. NoLimitSquads

    2021 PIU Mirror and Spoiler routing

    I haven’t done the spoiler on the new body style yet, but Ive done many doors. The door boot on the vehicle side can be a major pita. The plastic retainer has a clip on all four sides. The clip on the back side (towards the front of the vehicle) is what makes it difficult. I pull the rubber off...
  22. NoLimitSquads

    Whelen HHS3200 changing legends on push buttons

    Yea, you can pop them out, but it is tedious if you dont want to damage anything. Ive found it to be quicker to split the controller and dump them out.
  23. NoLimitSquads

    Whelen HHS3200 changing legends on push buttons

    You have to take the controller apart. Just remove the screws, its pretty easy.
  24. NoLimitSquads

    HHS-3207 won't connect to Command or HHS Programmer

    We’ve been told that it is an issue with the firewalls on the computers. Im not sure what the answer is, but try un-installing command, and re-installing. Sometimes that helps. When you try to connect, is the Hhs connected to power. Try unplugging power and see if it will connect. When you...
  25. NoLimitSquads

    2017 F150 Cencom Core install. Where to mount?

    This was an F-150, but I think it was a 2010.
  26. NoLimitSquads

    2017 F150 Cencom Core install. Where to mount?

    I usually make a box that fits under the rear seat. This was a 20 Silverado.
  27. NoLimitSquads

    Whelen Cencom Sapphire trouble shooting A dead unit

    I don’t really pay much attention to the sapphires, because Ive never had a problem with one. But if you don’t have power to the ignition sense, I don’t think that there would be any lights. You could plug in the usb cable to extract or transfer a file, and that would turn on some lights on the...
  28. NoLimitSquads

    Whelen Cencom Sapphire trouble shooting A dead unit

    Ignition is red/black. Backlight is white/black. https://www.whelen.com/wp-content/uploads/2020/07/14570.pdf
  29. NoLimitSquads

    New Whelen Cencom Core-R???

    Core R is pretty much a fancy control point. It has, I believe 10 inputs, a dry contact relay, and is able to control multiple WCX devices.

Secure Browsing

Search for a Member

Top Bottom