Search results

  1. Stampeed Valkyrie

    **now with pics**What would be a good offer (off site possible buy)

    I gave away a few bins of Edge stuff a year or so back. To me it was good riddance, so I would have valued it lower, but $125 seems to be fair if you plan on working on them.
  2. Stampeed Valkyrie

    My "new 25RWL"

    well on the plus side you have a model 25 confirmed.
  3. Stampeed Valkyrie

    My "new 25RWL"

    Ok I am gonna summon a bunch of members to this thread. After speaking with @BraniffLights he wants to reproduce an RWL or RWLI or RWLI2 series bar. He is going to need parts. Some I have, most I do not. So I am summoning anyone I think may be of some help here. @empire5150 , @Pete L. ...
  4. Stampeed Valkyrie

    My "new 25RWL"

    o_O Where to begin with this one. The tag should read RWLI or RWLI2. Going by domes I would agree that its for the later series 2 wrecker bars. Looking at the base.. its most definitely a model 25 base. On the plus side, you have a nice starting point to go in any direction you want...
  5. Stampeed Valkyrie

    Siren Testing

    I was thinking either this or using a pot which would allow me additional control.. I may just use the ear muffs
  6. Stampeed Valkyrie

    Siren Testing

    Stupid question time. I have a few electronic sirens I want to test. Noise db level is an obvious concern. What is the best way to test without making myself deaf. Thanks, Rob
  7. Stampeed Valkyrie

    For Sale Code 3 XL5000 bars - Lot of 2 - will separate

    I am loathe to say this, but have you tried Facebook marketplace? $250 shipped is a damn good price for this light.
  8. Stampeed Valkyrie

    Rebranded 144's?

    wow that is going for higher then I would expect even for NOS. Must be a collectors market for EEC stuff.
  9. Stampeed Valkyrie

    Early Edge Power Supply Question

    Once the City finally replaced or retired them a few years back, I am willing to bet it was all scrapped. They asked me if I wanted them, and I was like NOPE. They were ALL mix master Franken Edge bars, and they got their use out of them, most were more then 20 years old. I personally...
  10. Stampeed Valkyrie

    Early Edge Power Supply Question

    lol pretty easily.. I was hoping that I would NEVER have to deal with an Edge series bar ever again! so far my luck has held.. :p
  11. Stampeed Valkyrie

    Early Edge Power Supply Question

    @gtpts27 Unfortunately, I think either tossed my binders, or gave them away when I got out of supporting them. I will keep an eye out and if I find them I will let you know. Rob
  12. Stampeed Valkyrie

    Early Edge Power Supply Question

    Let me see if I still have any of my documentation from when I was supporting these things. Hopefully I didn't toss it when I dumped all those edge franken bars.
  13. Stampeed Valkyrie

    Mayberry Light

    @SDL valid point. Also less we forget that there is a very, very small group of people who actually know.. or for lack of a better word even care about things being 100% correct for a fictional vehicle. Most of the shows fans will see it and never give it a 2nd thought regardless of how...
  14. Stampeed Valkyrie

    Aerodynic 25 RQL-FAST

    Gonna keep this one short, more details in the video. In remembrance of all those who served and are no longer with us. Front Tag reads 25 RQL-FAST Rear. And the video...
  15. Stampeed Valkyrie

    Wanted Looking for MX7K Green Domes

    Just a heads up... I saw the name lightbarguy2015 and it rang a bell
  16. Stampeed Valkyrie

    Red base FireHawk FHL

    As mentioned previously very nice.. It appears that the White is washing out the Red from this view.
  17. Stampeed Valkyrie

    Wanted ISO 24EAH speaker grill

    hard to tell by that picture but you might need several parts. Front and rear Speaker housing, Chrome top strip. And possibly the black metal clamps that hold the bottom of speaker in place.
  18. Stampeed Valkyrie

    JetSonic Model J

    Ok so I "took" the domes from the blue Jet in the video above to replace the taped domes it originally had. I also synched the rotators to match the blue Jet above.
  19. Stampeed Valkyrie

    JetSonic Model J

    Ok, so synching this bar is a PITA. The rear rotators can be manipulated by removing a c-clip on an idler gear. The front rotator, you need to drive a roll pin out to remove the idler gear connected to the chain. Then you can reposition the front rotator. Without specifics I aimed the...
  20. Stampeed Valkyrie

    Jet Series Dome restoration and Paint question

    The black topper on vintage jet domes. as seen below.. my plan would be to mask off the areas to not be painted.. and then rattlecan the top sections.
  21. Stampeed Valkyrie

    Jet Series Dome restoration and Paint question

    So thanks to @empire5150 for getting me this as a source dome. It started as this.. With some soapy water and a magic eraser got me to this.. Just an FYI magic eraser takes off the leftover rubber gasket residue that dry rots to domes.. see the bottom of the picture above. and after...
  22. Stampeed Valkyrie

    Information / Jetstream domes

    Not too common. I have encountered a handful, and they usually don't stick around very long. The latest one I came across was on a mini-jet.
  23. Stampeed Valkyrie

    Signal Stat model 312 W3-80

    interesting, WD-40 is not really a lubricant, so I expect this issue probably rear its head again after some time. Might possibly want to use a graphite lube spray or something that wont evaporate off over time.
  24. Stampeed Valkyrie

    Need Code 3 Stingray help

    late to the party but this thread might help. Thanks to @Duster for the info
  25. Stampeed Valkyrie

    Whelen Corporal dome question

    with great Huzzah! and some assistance from @dmathieu the dome is back on. I have some fine tweaking to do, to get the bulb lined up just right. As I expected I was doing something silly. DOH!
  26. Stampeed Valkyrie

    Yet another what is this?

    size on this is deceptive.. a Par46 bulb?
  27. Stampeed Valkyrie

    Federal Signal 144

    ok I feel I MUST insist on some video.. :p
  28. Stampeed Valkyrie

    Signal Stat model 312 W3-80

    I am not seeing a gear assembly I just see a motor, you probably will need to unmount the motor to get to the gear assembly. Remove the 3 phillips pan head screws (on top) that appear to me holding it to the underside of the beacon. This should then allow you to drop the motor and see how...
  29. Stampeed Valkyrie

    Whelen Corporal dome question

    I did! lol I will try again when I get a chance.

Online statistics

Members online
Guests online
Total visitors

Members online

Forum statistics

Unanswered questions
Latest member
Top Bottom