Search results

  1. D

    Wiring question - SVP led grille lights

    Thank you! You always help with stuff and I appreciate it! I'll take a look at it! I hope you have a great night!
  2. D

    Wiring question - SVP led grille lights

    The guy I purchased it from just wrote me he said to just "tap" the purple wire to the red/positive to change the pattern. He buys surplus lights and sells them so wanted to make sure before I tried it and fried something. You say touch it to the ground though. This is why I wanted to make...
  3. D

    Wiring question - SVP led grille lights

    Hello! So I usually don't buy LED lights, but I ended up buying a pair of SVP bumper/grille lights. The guy I bought them from has it marked that the purple wire is for "pattern". The question I have, what do you touch the purple wire to in order to change the pattern?? There's not a model...
  4. D

    Legend Pattern Not Staying Programmed

    I've never programmed one, but have you seen this video on programming one? He talks for a while, but about 6 minutes into the video he shows programming steps. Might see what he's doing compared to what you are doing. (If you're using the same controller??) If the video doesn't help maybe...
  5. D

    Vision bar connection parts missing.

    Exactly, that's why I was wondering if you had a picture of the actual lights. The standard motors look the first picture below and the "smart pods" look like the other pictures. If that light bar only had the standard motors it's a vector. If it had two of these smart pods it's a...
  6. D

    Vision bar connection parts missing.

    Ok, thanks! I've never seen one wired up like that. I'm not sure how that would work on a Vision since Vision's have the stepper motors and home sensors and stuff. Interesting! Thanks! Sorry for being nosey, I like light bars and try to learn as much as I can.
  7. D

    Vision bar connection parts missing.

    solidamber, Usually in a vision lightbar are three circuit boards that look like this picture below. Like Jennifer Rose said, that lightbar you have is totally custom. Is your lightbar a Vector, Smart Vector or Vision though? (I'm just curious.) Do you have pictures of the lights? A vector will...
  8. D

    Can you slow down rotator motors?

    I'll try to find gears first, the resistors are just a "back-up" idea.
  9. D

    Can you slow down rotator motors?

    Thank you! I'm trying to find some slow rotators to slow down some D-Tech rotators for a more distinct flash rather than a fast "twinkle". I noticed also the motor shaft on some motors is smaller diameter than other motors so I thought about the worm gears, but can't seem to find the same size...
  10. D

    Can you slow down rotator motors?

    Anyone know a tip/trick where you can slow down the speed of a fast rotator motor? Why do some motors have capacitors across the + and - terminals and some motors don't? I heard somewhere you can use resistors in series circuit to do this, is that true? I like the slower motors better and...
  11. D

    Wanted Code 3 (or Federal Signal) slow speed/standard speed rotator motors.

    Still looking if anyone has any. Thank you!
  12. D

    Wanted Code 3 (or Federal Signal) slow speed/standard speed rotator motors.

    Awesome and just to confirm, they are the slow speed type?
  13. D

    Wanted Code 3 (or Federal Signal) slow speed/standard speed rotator motors.

    Hi - would anyone have any of the Code 3 rotator motors that fit the MX7000? (Or Federal Signal.) I'm just looking for the motors, not the entire rotator assembly. I'd like to find at least two, but depending on price I may buy a couple extra. Thank you!
  14. D

    Positive Bought Positive from mls60442

    mls60442 was great. Good prices, great communication, provided tracking number, packaged items very well for shipping, fast/quick shipping. Could not have went better! Thank you for the D-Tech rotators!
  15. D

    Information / Jetstream domes

    I've just seen them in pictures, not sure how common they are. Like these: That's what I was thinking also, but thought I'd check. I think domes like that for the Jet-series would have been nice!
  16. D

    Information / Jetstream domes

    Hi - just curious is someone on here would know this. I have seen the Federal Jetstream light bars with the clear dome (where you have to use the color inserts) and then I've seen the solid red and blue domes. Most pictures of the solid red and blue domes I've seen don't have clear areas for...
  17. D

    FedSig Valor Help

    Thank you for helping out and taking pictures for him, pretty cool of you! I hope he's able to find another board or get his fixed.
  18. D

    Wanted MX7000 clips

    Just curious, how many clips are you needing?
  19. D

    Wanted Code 3 D-Tech reflectors/rotators.

    Bought two D-Tech rotators from mls60442 -- thank you for helping me find these! Thank you everyone who replied back!! If someone sees this listing, I'd be interested in amber colored combinations also!
  20. D

    Wanted Code 3 D-Tech reflectors/rotators.

    Thank you! Those should work just great! I will send you a PM.
  21. D

    FedSig Valor Help

    Great! Thank you!! Do you have that board? Are there any markings or anything on it to determine a possible rating for replacement? If you have that board I'm sure k.mo would be interested in buying it. I still haven't found any for sale.
  22. D

    Wanted Code 3 D-Tech reflectors/rotators.

    I'd like two to start. The plastic ones would be fine for my little project. When you get a few free minutes please check and let me know! (No rush.) Thank you!
  23. D

    Thoughts on Vista

    I have a Vista rotator version in my collection and I like it more than I thought I would. (Ended up buying it from a guy I was getting another bar from and didn't know he had it until I was looking at the other bar -- bought both bars.) I personally think just try it out for a while and see...
  24. D

    Wanted Code 3 D-Tech reflectors/rotators.

    Thank you, I appreciate the information! I don't know anything about them so this helps! I think it's neat they do two colors. Also, I do like the slower rotators better. I take most of the fast motors out and replace them with the slower motors because I like the more distinct flash. Also...
  25. D

    Wanted Code 3 D-Tech reflectors/rotators.

    Hello...just curious if anyone has some of the D-Tech rotators they'd like to sell. I'd like to get two, maybe more depending on price. I'm not sure what all color combinations they came in, but it would be neat to find a couple red/blue and then maybe amber with some other color? Seen them...
  26. D

    Trying to identify a light/beacon from my childhood...

    Was it a dash light or up on top of the vehicle? I'm not familiar with lights that had 8 rotating filters...most I've seen is 3 filters or so. When I read smaller lights with magnets for some reason these older dash lights popped in my head. (I may be way off, but this is what came to mind.)...
  27. D

    Wanted S&W plastics and parts FOUND.

    Not sure if you trust (or use) Ebay, but there's a few Smith & Wesson parts on there, a red dome, but I don't see any end caps listed. The red dome is kind of pricey, but he has "or best offer" listed...his shipping is kind of high, too, but thought I'd toss this out there just in case. It...
  28. D

    Wanted Code 3 3-up White TD/Alley heads

    I know you want to keep it cheaper and not break the bank...this listing is pricey a little and it's for the lights and feet mount, but have you seen this? Not sure if you'd be interested, but this is all I can find in clear. It says "pair" so you'd get two...
  29. D

    FedSig Valor Help

    You are welcome and sounds good! Hopefully someone has the board where you can get it up and running again! (I'd hang on to the board you have and keep it for parts.) I'll have to check back and see how things are going!
  30. D

    FedSig Valor Help

    Well, no real luck from Federal Signal either. I asked for a picture of the board or if they could tell me what component fried and this is his copy/paste response (no picture): (So, I'm still trying to find a picture.) Douglas, We replace the board. If you have a S.O./sales order from the...

Online statistics

Members online
13
Guests online
210
Total visitors
223

Forum statistics

Threads
47,680
Messages
419,212
Unanswered questions
8
Members
17,196
Latest member
Trebor9
Top Bottom