Search results

  1. needforspeed

    Vision bar connection parts missing.

    Looks like one switch would allow power to the fuse block, then to the individual pots then to the lights. looks like it is "all on" or "all off" with one switch and no controller.
  2. needforspeed

    FedSig Valor Help

    No markings at all
  3. needforspeed

    FedSig Valor Help

    Sorry, but I pulled the board from a working bar just for the photos. The chip is completely unmarked, so someone else with more knowledge about smd chips would have to chime in.
  4. needforspeed

    FedSig Valor Help

    surface mount ceramic capacitor?
  5. needforspeed

    2014 Durango Feniex ILB Install Help

    I just did one on a 2019 Dodge Durango Pursiuit and had the exact same issue. Luckily I have experience in fabrication and was able to reconfigure the bends in the provided brackets. The bar is now tight to the headliner and windshield with all the provided gaskets and brackets. I spent over an...
  6. needforspeed

    Flasher for fusion ILB

    So the answer is yes as described above. The three wire modules I have work fine with a separate positive flasher. I'm going to use a ULF-44 to get the patterns and sync that I want.
  7. needforspeed

    Flasher for fusion ILB

    Specifically I was told that the Fusion dummy heads can be controlled by; Constant +12V to red wire Constant ground to black wire +12V to trigger wire for steady, or pulse +12V for flashing at pulse rate Do I understand this correctly?
  8. needforspeed

    Flasher for fusion ILB

    Can a different flasher be swapped into an Fusion ILB so it can be sync'd with other lights?
  9. needforspeed

    2019 Cherokee Tail Lights

    Where did you mount your flasher, and where did you tap into the rear harness? If you don't mind.
  10. needforspeed

    2019 Dodge Durango R/T. POV

    Any pics of visor bar and mounts?
  11. needforspeed

    Wanted Whelen avenger or sound off pinnacle

    I have a Sound Off Pinnacle 8 head that is all blue for the CV rear deck. let me know if your interested.
  12. needforspeed

    Shroud Swap

    Hi Guys, I am changing out vehicles soon. I'm moving from 2011 Crown Victoria Interceptor to 2019 Dodge Durango Pursuit. I have a front Sound Off Signal Pinnacle (EPL 8000) that I'd love to move to the Durango. I know I would need new shrouds and brackets but don't know where to source them...
  13. needforspeed

    2019 Dodge Durango R/T. POV

    If you get any info on flashing the rear lights, or front lights for that matter please post. I'm interested in any info.
  14. needforspeed

    2019 Dodge Durango R/T. POV

    May I ask, where are you tapping into constant power and Ignition only power?
  15. needforspeed

    Wanted Strobe Power Supply

    NP, glad you got it done.
  16. needforspeed

    Wanted Strobe Power Supply

    I have 2 Whelen UPS-64LX. Each has 4 outlets. I will donate if you want to pay shipping.
  17. needforspeed

    4200DL and stormpro100 question

    Install took all of about 10 mins when replacing whelen amp. Hooked up the positive and negative wires. Then the speaker wires and RJ-45 cable. Reprogrammed the controller to use the StormPro siren and everything was done. The sound is crisp and just as loud as the whelen amp that came out.
  18. needforspeed

    4200DL and stormpro100 question

    Thank you sir
  19. needforspeed

    4200DL and stormpro100 question

    I'm sure this is a JV question but, I have a 4200DL controller and want to add a stormpro 100, is this accomplished with the RJ45 Jack and programming of the controller or do I need to program the tones on the 100 and then hook each input to an output on the relay panel? Any input is...
  20. needforspeed

    For Sale NIB Federal Signal Viper S2 Blue/Blue

    These are New in Box, real, Federal Signal sync version Viper S2 Dual Visor Lights in Blue/Blue configuration. They are unused and were going to be installed but never made it. You are purchasing one dual light at this price. Shipping included CONUS.
  21. needforspeed

    Liberty Ballast manual?

    That should have a control harness and an output harness. the control harness should be. IIRC it is a ground side flasher. Input black - ground red/white stripe - 12v + blue control - 12v+ green control - 12v+ white/violet - scan lock 12v+ purple - low power 12v+ Output 1 yellow +...
  22. needforspeed

    Liberty ballast question

    That should have a control harness and an output harness. the control harness should be. IIRC it is a ground side flasher. Input black - ground red/white stripe - 12v + blue control - 12v+ green control - 12v+ white/violet - scan lock 12v+ purple -...
  23. needforspeed

    Wanted pair of red linz6

    wanted, pair of RED linz6....new or used/flasher or steady Bill
  24. needforspeed

    HLF install help

    I have a whelen 2150a isolated hlf.  I want to install it on a 2010 Chevy Traverse. Has any one done one or know if this would work without any Body Control Module issues.  And of course, wire colors and best place to tap. Any constructive input is appreciated. Bill
  25. needforspeed

    Wanted Whelen 600 series Red Blue

    I have two blue 600's with clear lenses. I can do $55 shipped if you want

Online statistics

Members online
10
Guests online
120
Total visitors
130

Forum statistics

Threads
47,942
Messages
420,464
Unanswered questions
8
Members
17,289
Latest member
WX1013
Top Bottom