Search results

I had the same issue, and there's an event for it, if I remember correctly, not just the button. Check for a "Manual Stop" under events or something like that.

QUAD 200s sold

More bumpies. Make me an offer!

Bump...updated pricing.

Feniex QUAD Interior Bar - 2020+ PIU brackets. Original unit failed, just got this one back from Feniex as a warranty replacement, didn't pull the wrap off, but did hook it up to the bench to test it and it works as expected. Includes the QUAD Converter. $450 shipped ConUS --SOLD-- Feniex...

I believe the 2020 model year was the first year the headlight flasher was factory. So on the 2017 there could be multiple different flashers that were used.

FYI for anyone doing this, I was going to swap out some heads this weekend, so I went to get the part, and the Kit Number LB5B-78442A86-AA that is listed in the Modifier's Guide is actually the engineering number. After some back and forth at the dealer, the correct part number for the seal kit...

Ooooh that's good to know.

If I had to guess, he used the ODBII interface on the Carbide, which would be the easiest way for sure.

So - I don't have a cruise option on the low (or high) power outputs on the Cantrol...

Thanks! I'll give that a shot when I get home.

Low Power - and I made sure the "Power" was set on each lighthead.

So on this topic... I'm at a loss here. I have a Cantrol Gen 2, trying to make the "fake" DVI patterns. I have 8 Virtual Inputs, they go 20/40/60/80/100 and back (with two groups alternating). They are all variable timers at 100ms (I've also tried 1s). The OFF state for each is set to "Next...

Still looking...in case anyone has one.

Yup that's the correct one. Odd that it's not coming on though. Unfortunately Ford might be the best place to ask at this point. Other than NoLimit's issue with the fuse (which it doesn't seem to be) I can't think of much else that would make it not work - it's a pretty basic connection, and...

Confirming the Orange wire you are grounding is the #1 wire in the white 14-pin connector in the center console, correct? (Not trying to be a jerk - just double checking).

Purchased a Cantrol system and had great communication, and was packed very well.

That's interesting, because that hasn't been my experience. I have a bunch of Feniex QSM and Q3 that I have set to solid using an external flasher with no issue. Might just be they fixed the delay with the QUADs maybe?

PM sent

Looking for a Whelen 16 Port Wecan expansion for a CANTROL. Hoping to keep it under $150 shipped.

Payment is sent.

PM sent.

Glad to hear you got it working!

Thanks!! I was finally able to figure that out this morning. But I got it working! Thanks for the reply! I meant to update this.

I see, that's the issue. You need to have a switch connected to turn the headlight flasher on and off, as SCPD said that wire has to go to ground not to 12 volt positive.

What SEPD posted is correct. Mine is set to 22 on the value he showed for the combo flash. Munzinger - are you headlights flashing at all, and just the pattern isn't changing, or are they not even flashing?

I've been searching and can't find any answers. I see the wires for the aux buttons in the center console. Are they just 12 positive when you push the button? I'm trying to wire up a hammer to them and when I connect the gray brown wire for button number one to the trigger on the hammer I get...

If I remember correctly, I tried that Forscan sheet first, and it did not work for me. So the value I posted above is what I changed. Sorry life's been hectic care. I have a chance to connect and see my thing. I should be able to before the weekend.

Odd. If I get a chance this afternoon I'll plug into mine and set what it's set at.

The "21" in the third box is what you change to either "22" or "23".