Search results

- Whelen Slimlighter TIR6 in Red/White. - Includes Suction cup mounts - Includes cigarette plug with on/off switch (was cut off for hardwire). - Does not include the smooth lenses - Less than 10 hours of run time $150 shipped with buyers preference of USPS, FedEx or UPS with insurance. PayPal only.

2 Whelen Dual Avengers Both are Red/White Includes suction cups with bracket and the included 2 button cigarette plug, but they have been cut off to hardwire. They have less than 10 hours of run time from my POV. $100 each shipped or $175 shipped for the pair Buyers choice of USPS, FedEx, or...

I am selling an older, but gently used PCC8R. It was used in my work truck. Probably only has 20 hours of run time on it and in very good shape. The only issues are: 1) 1 connector is missing a green wire. [You don't need the green wire for simple positive switching] 2) No hardware for the...

They were the right size that I could fit them in the OEM housing and then used 2 small screws to secure them in place. Then I put some black silicone around them to keep moisture out. I removed the OEM reverse bulb, spliced in a wire for the cannon override so they act as a reverse light...

Well I completely forgot about this thread. And I've gone backwards. I was recently head hunted for a new job in the private sector. After losing 2 friends in the line of duty in the last 2 years and the crazy hours I was working I realized I needed to get out. So I've quit the Sheriff's...

http://www.firecritic.com/2015/09/09/lansing-mi-firefighter-dies-after-deliberate-hit-and-run-at-iaff-mda-fill-the-boot-collection-site/ It has been a rough day for us here. We lost a fantastic firefighter and great friend. Please keep Lansing Fire, Lansing Police, and Ingham County Central...

The Avengers are where they are for 2 reasons.  1) The headliner - look at the top edge of the windshield, you see there is a "recess" in the headliner by the A pillars. The spot is the perfect size for avengers and they sit almost flush with the headliner under the RVM. 2) Semi's - Due to the...

I'm finally getting started on phase 2. Still have a little ways to go though. Front is pretty much done. Hardest thing to do was getting the dual Avengers installed in the headliner. Crazily enough, the best solution ended up being the coat hanger method. Thanks guys!

Finally, a night off. Just finished a 15 day stretch. That was rough.

There's a road barrier sign company around here that HAD trucks set up EXACTLY like this. After 2 of their trucks got rear ended in the same construction zone in 2 weeks time, they changed their lighting set up. In theory having lights mounted up high is a great thought. However, when they get...

No problem. Let me know if you have any more questions. I've gotten pretty familiar with the 15's. I've learned there is a hard way and an easy way to do a lot of stuff on these trucks. Unfortunately I learned the hard way the first time around for everything I did. :popcorn:

Our dispatch center is hiring if you're willing to relocate to Michigan. Haha. Most of them are making $60K with some making $100K+.

On my 2015 F-150, the rear's were easy as long as you don't have the aforementioned Blind Spot Radar because it eliminates the reverse light housing. I used canon's under the brake light and full out replaced the reverse lights with white cannons and wired them with Phase 2 as reverse lights...

Our dispatch center is in a large city and we are in between a few of the larger stations that run Medics. I do enjoy sending Station 49 into Station 46's area when the "Red Shift" is working because they have to go right by our window and they are the only shift that will run the Power Call. HAHA

Sorry for the delay guys. I had a LONG week and spent most of it at work. I finally have read and responded to all PM's. Thanks for your patience.

I am getting a lot of personal messages about this bar. I want to clarify a few things. 1) This is NOT a WeCan XLP 2) This is NOT a Duo XLP 3) I do NOT know every make and model that this will fit. I bought this light bar (even though it's Explorer specific) for my F-150 because I knew I...

That's a good question. I can't really decide. We do a lot of traffic control and a lot of scene lighting for crime scenes and during accident reconstruction. I already have a Dual Color Apollo 600 that is going to replace the light stick in the grille since it has flood mode. I also plan on...

Our slick top is fully marked. Inner Edge, Sound Off Intersectors, 4 Ghosts in the grille, dual vipers in the rear side windows, dominator 8 in rear windshield, then Vertex HAW's all around.

Measure the distance on the sun visor brackets and I will tell you if it comes close.

I have a Whelen Inner Edge XLP 2 piece, 10 LED modules with 2 Take downs. The bar is all red, only has about 5 hours of run time on it. Comes with Ford Explorer Interceptor brackets and has full length cord (15+ feet). I had it mounted in my 06 F-150 with no problems. Only reason I am selling it...

I had a couple hours this morning free. So I was able to get the Cencom finally installed. Not a lot of good places to put it due to the full console, but I like it.

I had a couple hours this morning free. So I was able to get the Cencom finally installed. Not a lot of good places to put it due to the full console, but I like it.

I haven't seen them in person. The Cannons are damn bright because I replaced the OEM bulb. Placement is everything! Now I just need the freight company to deliver my pallet and a day off to get some work done.....

Yup, still in Michigan. Being in Emergency Management allows us to do things a little differently. We are technically not considered either Law Enforcement or Firefighters. Our department issued take home Tahoe (which I'm not allowed to post pics of) is a slick top as well. I still have to be...

I've had pretty much zero progress due to an insanely chaotic last couple of weeks. Short version of the story is I've been cleared to run slick top, finally, and been waiting for some new products and hardware to de designed and manufactured. I'm basically going to change everything except the...

I am in search of mounting brackets for a Whelen Inner Edge XLP Ten head with 2 TD's for a 2015 F-150. I see it is listed on their website and have scoured the internet and multiple sites and can't find anyone that has them. Any help appreciated. The part number for the whole unit is IX47UFZ.

Nope. That's the only place I could get that 1) had something I could mount to and 2) wouldn't interfere with the active shutters. Phase 2 will have lighting higher up.

I had time to finally start working on the truck. This thing is tricky to work on. Grille removal- there is 2 ways, easy way and hard way. Johnwadeg you did the hard way. Easy way is to remove all the push pins holding in the rubber cover over the radiator, the. Remove the 4 black bolts...

Okay, thanks Steve. Unfortunately the 14's and 15's are very different.

That's what I was afraid of. I would love any tips you can give! My plans to install have been delayed due to work.