Search results

Still looking for a flushMount Edge 9000 - I believe the actual model number was 9xxxFF - these were the 54/48” lenght, not the ambulance ones (similar to the edge plus but in standard lengths). The mini version would also be desrible. Red/Blue preferred. Trying to avoid chopping a frame and...

I am looking for any of the non handheld control Heads for the sapphire. Preference is the rotary siren head or the 21 and slide to match my Cantrol in another vehicle - but I’ll consider the rest. Must be in like or excellent condition. Photos required.

I owned a 9622M which was the decked out version. The two red as i recall - one was for The strobe side and the other for the halogen stuff. The t/a runs solely off the TA of the era Which should be standard positive outputs (remember 5MM LED’s were first produced in this era). The...

What’s the operating difference? I am finding no difference in operation when using HAW’s in the taillights to act as brake/turn functions while warning is operating (steady on or as single flash) using latched or lights for the OBD signal. From Back in the day, I was understanding that...

I am looking for a 48/52/54” flush mount edge 9000. NOT the 4500’s etc but the older ones that use to be common. Four strobe plus takedowns preferred. Will consider the shorter two strobe model. Must have black center. This is for an office project. Red/blue preferred. replicating a CSP bar...

Looking for PAR46 strobes for the 80 series bar as well as a red driver side some with takedown (small) cutout. Rear can be solid or with a par46 cutout

So late to the party - but as previously stated, it’s a custom job by Whelen as they have done custom work since the crossbars used. From a history perspective, all our cars were ordered without am/fm radios until the delete option cost more than keeping the radio. There was a four position...

PJH submitted a new listing: Sierra Wireless LTE VZW modems - Sierra Wireless LTE VZW mini-PCI Toughbook Motorola Read more about this listing...

PJH submitted a new listing: Whelen 500 LIN6 2 wire and 4 wire / liberty corners blue - Whelen 500 Liberty LFL blue Read more about this listing...

For sale is multiple LIN6 and SX (extended) corner modules, all in blue. Have one 500 series halogen light and two 500 series holders. Looking at $15 per LIN6 LED, $25 per corner. Shipping will be USPS whatever flat rate box fits what you order and won't get crushed. I am open to trades for...

Just as stated - need a pair of surface mount IONS (with all parts) in red/white split

I have the equipment. Cover the cost of shipping both ways (usps small box should work). Throw in any extra you want and a department patch

No it needs to be messenger/surface mount style for certain bolt locations and lenses. Otherwise the other stuff would work but it's replacing a previously installed one for plug/plug and some custom work

Looking for a short half frame (think body mount) for the Edge 9000/9M series. No modified cut frame. Should be able to fit two corner LED's and center section for a house project. Bascially messenger size or slightly longer: https://i.ytimg.com/vi/p17lu4QTqG0/hqdefault.jpg

I have a pair of like new red universal mount wide angle IONs. I need the surface mount version (prefer wide angle) also in red or red/white combo. There were Mounted in a push bumper for about a month with about 5min of run time. I should have all the parts for it as a compete kit.

loosely in the market for a 60" NFPA Freedom or Ultra strobe bar for a brush truck. Red/white/Amber preferred. Should have acceptable power/control cables - Denver area pickup preferred. Must work - will be placed on an active apparatus

That's why I posted here ;) I'm good with circuits etc but I'm not going to fry things by trying :)

And the resistor value?

Yep.

Ok - where on the circutboard

The white is good, but the red LEDs are a tad overwhelming at night. Is there a way to adjust this? ECVDMLTAL100

Check what wire/connection you selected and ensure that you have front and rear lightheads selected. Its been a little bit since I had to adjust one, but I know the software seems a little goofy on slower computers. If you can, email me the file and I can take a look at it.

loosely in the market for a Whelen Freedom WeCan I/O board to replace a conventional board. Harness preferred but not a deal breaker. Also may be in the market for a control point as well if a board is found

All taken care of. Thanks txfire!

looking for a new Soundoff ticket/dome light (red/white). Prefer if in stock and able To ship asap. Thanks

Couldn't quite think of a better title - but I will need to convert a pair (if possible) a pair of universal moun ions to surface mount. Other than the mounting option, is there any other physical difference between the lightheads that would prevent this? The drawings seem tonindicTe a slight...

Looks like I maybe all good at the moment. May need the same in surface mount now

Still looking in case someone has some

Once I get a 02 to replace it with...

Losely in the market for the I/O board for th Me freedom bar. Prefer one with harnesses but will entertain resonable offers. Replacing a conventional board.