Search results

At the high I was buying them for $150, at the low $75. Oddly enough the $75 units were coming with factory fresh cable harnesses.

Sounds like a vehicle code violation to me.

OK. I think this is all finally coming to fruition. I am in need of a Whelen Smartlogic flasher and (4) amber Vertex lightheads. Any help? TIA...

I've powered up a few 9000 bars that have been powered down for a LONG time and never had an issue.

jperrylighting.com has Cantrol G2 units at a good price, they just don't have the wiring harness with them. https://jperrylighting.com/2018-gen2-whelen-cantrol-amp-only/ I bought mine from him. Not sure what the significance of all the different model years of these things is. He has a bunch...

Nicole is a sweetheart, however still on the lookout for (4) amber vertex and a couple ULF44's!

I'll take the amber vertex, please.

Still looking for the Vertex.

OK. Went ahead and bought that after talking to Joseph, so that issue has been handled... Now I need another one for the rear.

Thanks Seth. I guess what I need to do is find an A/A raider (good luck) and make it work independently. Slimlighter/TIR stuff is a bit old for what I want to do.

Is there such thing as a Whelen dual dash light (LED) that has independent control of the light heads? I want CA steady burn on one side, but I want to synchronize the other side (passenger) with the front and rear Vertex lamps on the passenger side. Think CHP slicktop. What is the best way to...

Yeah that's what I understand, wasn't a really popular product or some sort of custom manufacture (CHP) thing. Avengers would be fine. I'm not going for the high score on this, just functionality.

Hi All. Having to build a successor to my '97 CVPI that was recently destroyed in a crash. Saved my life, so I bought a 2011. I am looking for SYNC model amber/amber Whelen Dual Raider dash/deck lights. One for the front, one for the back. If that's unobtanium, A/A Dual Avengers would do just...

All squared away, got back in contact with Mr. Perry who came through as always. Thanks!

No worries. And yes, that's who I usually buy from, must have hit them at a busy moment.

I've made contact with my regular guy, so should be squared away. If not, I'll drop a message back.

I didn't see anything besides the red end caps, and I don't know if the 9M/Ultra stuff would work with a standard 9000. The wiring isn't compatible with my bar, unfortunately. Thanks for the heads up on the thread though!

I am in need of the following parts: (1) LC wiring harness (Matrix Bar) (1) Main Power harness (black/red) (2) Rear red/amber duplex lenses for a 48" bar (2) Red endcaps with alley cutout and gaskets (1) Dual Halogen lighthead with bulbs (CA steady burn in the center of the bar type thing) (1)...

I believe the lightbar I'm working on with this board is a "9416". Anyone have an interior wiring diagram for the modules?

By chance does anyone have a manual for this board? Whelen hasn't been of any help...

These are the devices I need wiring information and/or a manual for. I have the harnesses as well.

I'm in the same situation. Torn apart bar and need internal wiring information. Have all cables and harnesses.

I am. Depending on price I may need two at this point.

Looking for a computer mount for a 2004 Crown Victoria, the type that bolts to the front passenger seat bolts and provides a pipe for the actual dock to mount to... Or whatever else is required to mount the dock to it. Computer is a CF-19, already have the dock. The car already has a console in...

OK. It's that "Next Iteration" that I'm looking for.

OK. I don't think ours have screws on the front, but I don't remember off the top of my head. I'll check it out when I see the engine this weekend.

Looking for one or two 911EP LS15 lamps in all red. The outdoor mountable type (non-switched?). Should be a 15" long thing with 4 LED modules fixed to a silver mounting base. We have one on our fire engine and I want to put a couple on the brush rig. They are very effective. Please PM. Thanks!

Bar was sold some time ago. Mods please lock.

Anyone have a USED wiring harness for a Gen 2 CANtrol they'd let go cheap? Really need the main power, LED output cables (2) and input cable. Dont care if they are short so long as I can splice onto them! Any help? I'm aware of aftermarket replacements. Trying to keep costs down.

Mine was a two-pin Molex male connector, red and white. You are correct, thats the center takedown.