Search results

Update: I put the truck in the shop and went through all connections in my system. All seem to be fine, I was not able to reproduce the issue. I am suspecting it is something inside the control box at this point.

Hi All, I have a new production PA300 200 watt model that I have installed in my 2017 GMC Sierra that is married to a federal signal TS-200 speaker behind the grill. I have noticed recently that when operating in wail, the tone seems to be waiviering. It doesn’t ever stop or cut out completely...

One will be a combined control and another will be just a siren. I typically run dual sirens.

I have a new 2017 GMC Sierra 2500HD SLT on order, im looking for some input for my new install. I have ordered the truck with the front bench seat and I am curious if anyone has done one yet and what console they used. I know there is a 3 stack option that replaces part of the dash. However I am...

Ive got a deluxe controller for the code 3 arrowstiks and when I hooked it up it will only steady burn two bulbs in the stik, no flashing, or directional signals, and when I change the selector on the controller the two bulbs that are lit will change. I tried it both on a stik in a MX7000 and...

Ive got a similar problem occuring on my 95 chevy silverado, the whining noise that is coming across on my minitor V increases with RPM. I dont get the noise across on my portable radio just the pager. Ive replaced the grounding straps on the truck and checked the battery ground as well. Also...

ok thanks for the input, I may let this one skip by.

Just got some further info from him stating its a PA-20A series 2F in 24 volt. I wasnt even aware they had these in 24 volt, but he says it works on 12 volt.

yes the seller stated he tested it and all functions work as they should, PA mic is attached. He says he found a manual online and found out which prongs to use to test the unit.

The only downside is the harness is missing, is this still a decent deal?

Ive got an opportunity to purchase a PA-20A for 65 bucks, seller says everything functions as it should and it appears in good condition. Is this a good purchase? Im not too familiar with the older siren values. Any input is appreciated. Thanks!

My Chief and Deputy Chief asked if I would research some options and pricing to upgrade some lighting on our 93 Ford Tanker to reduce some amp draw and try and keep the switchbox from getting too hot. Currently it has a 6 rotator aerodynic with four sealed beam flashers, two code 3 550s on the...

I started with a teardrop light, went to a code 3 mini lp, a code 3 420, and currently a soundoff pinnacle, all worked well for me. Also currently I run a led dash light, wigwags and hideaway strobes.

Having problems with an install on an 03 chevy impala civilian version, the flasher is a Soundoff signal ETRR00CG ground side drl compatible. Followed the instructions included but the headlights would not flash. When supplied with power and ground the flasher relay would click. There is a pink...

Im trying to decide between these two sirens for volunteer POV response. I really dont have much need for a PA. Was wondering what everyone thought, pros and cons of these two sirens. I am leaning towards these two because of the scan lock tone bank to chose from. Any input is appreciated.

Personally, awhile back when I ordered from LED Outfitters before I heard the horror stories, I did not have any problems with customer service or the quality of the lights as they are still in service. However, I know someone who had a bad experience with LED outfitters, when they shipped the...

No I have not attempted to contact him, I was going to wait until I decided on which one I wanted. I think im going to go with the mini pinnacle. Thanks for all you input.

Yes I was looking at the one in Kentwood, Thanks for the input, I wasnt too familar with that brand or style of lightbar. Im now thinking the pinnacle is my best bet. I dont want to get something outdated that may cause me problems down the road.

Im thinking of upgrading my roof light on my 1999 GMC Yukon, I am debating between the mini pinnacle or a full size millennium. The millennium is used on Craigslist for a decent price or I would buy a pinnacle new. I am looking for the pros and cons of each light, any help or input is greatly...

Is it possible to change out the rotary tone selector switch on a Galls Traffic Buster Siren by Code 3, if so does anyone have a source to get one of those switches?

Thanks Guys for all the input its given me some good ideas and other things to look into, just to note i have an intersection bracket on the way and I have some Code 3 XT3s to go on it when it gets here

Im am going to be doing a haw strobe installation on a 99 yukon denali, and my plan is to put the strobes in the parking light/turn signal housing so I can be as far to the side as possible for intersection warning. There is an amber reflector inside the clear housing and I want to take that out...

Thanks Guys for all the input, Ive decided to go with some Code 3 XT3s on a modified license plate bracket and I have a set of strobes on order now.

I have a 6105 mini bar on the roof in all red, I was looking for something down lower in front of the front wheels.

Looking for suggestions for some intersection lighting for a 99 Yukon Denali. Something that is cost effective and will get the job done. Saw the front license plate bracket on LED Outfitters and wondered if anyone had tried it.

I would recommend using some type of roof mounted light whether it be a throw light or mini bar. I run with a mini bar, i usually recommend them to anyone in the area who is a responder looking for a vehicle setup. Although I have seen alot of set ups which would be questionable at best, your...

Hi all, I am working on restoring an MX7000 bar with five rotators, two alleys, two takedowns, and two intersection lights. I am wondering if anyone has the wiring diagram or know what color wires go to which function. When I got the bar nothing was connected internally just harness was just...

Just wondering if anyone out there has one of these and whether or not its a decent light. I have watched a couple preview videos and it seems to put out decent light. I am considering upgrading to one of these to replace my old 6105. Cant seem to beat the price either. Any thoughts or opinions...

No luggage rack, and i'm unsure of the exact height and rib spacing and I dont know if theres an even or odd number of ribs.

I have someone who has inquired to me about equipping their 06 Jeep Liberty for emergency response, I am thinking about a mini bar for the top but I dont know how that will work with the raised ribs on the roof. Does anyone have any suggestions, know of the bars that might work or have any ideas...