Search results

  1. buddek09

    Rontan Winglux-S LED Lightbar: Photos, Video, Manual all inside - Update 3/2021

    I haven't been on this forum lately due to changing careers several years ago, but someone messaged me looking for the ICM40 manual. The photobucket link no longer works so I thought I would upload the pictures here in case someone else comes across this thread looking for the manual.
  2. buddek09

    Cobra T6 Mounting

    Cobra T6's and the Fusion Surface Mounts are the exact same size. The brackets are interchangeable but require some modification since the T6's wires exit out of the upper or lower side, depending on orientation. The Fusions wires exit straight out the back. If you get the Fusion bracket you...
  3. buddek09

    Star vs. SOS

    I agree with Bvfa23. I am a Feniex and Star dealer but the only Star product I have sold was a hand held siren unit because, at the time Feniex did not offer one and, it was a direct replacement of one that had failed. I am only a dealer with Star in case I ever need beacons because Feniex will...
  4. buddek09

    Official "Whacker" or "Screwed Up Install" Thread

    His response in the comments to why they have blue lights "because it a police car to it helps out a lot to use an when we are in a bad neighborhood we use it so bad people will leve us alone"
  5. buddek09

    Anyone else having horrible luck with LifetimeLED?

    I have never switched my headlights to LED, though I have thought about it. One brand you might want to check out is VLEDS. I think they just recently revamped their LED headlight bulbs. I haven't looked into them but have used a bunch of their other LED products and don't have any complaints. I...
  6. buddek09

    New Supervisor Flex problems and questions

    Before you remove power to the 4200 check the voltage on the output(s) that the lights are coming on dim with when the scene mode is on. It's vital you test it before power is possibly removed from the 4200, especially if it's the 4200-dl version. I've had a 4200-dl glitch for a customer, it was...
  7. buddek09

    Blueprint sound off siren

    I'd assume you are wanting to use the factory horn to control the siren. In order for myself or someone else to give an accurate answer on how hard it would be or what is required to wire the siren into the factory horn wiring then vehicle information is needed. Year, make, model, and if it's a...
  8. buddek09

    Real talk - flash patterns

    Dave is right about the customer choosing the patterns. Though this one isn't the greatest I did use slower patterns for the rear of the lightbar. They only use mode 1 or 2 when parked on the side of the road. I admit the front is bad on mode 3 but this was not the final pattern. I was still...
  9. buddek09

    Putting Whelen LINz fog lights in Ford SUV interceptor

    You will have to cut them out. Those look like the correct brackets but their are some other Ford parts you will need. Here is the install instructions, which also lists the other parts you will need https://www.whelen.com/auto/media/installations/PAR-28/PAR-28%20Installation.pdf
  10. buddek09

    Whelen WeCan program cable

    It's just a standard A-Male to B-Male cable https://www.amazon.com/dp/B00NH11KIK/?tag=elightbars-20
  11. buddek09

    Feniex offroad...

    Prices on the their website are MSRP. Can find prices on our website found in my signature.
  12. buddek09

    ERM Flasher

    Bullfrog, I'm not entirely sure about the flasher but most of the features ERM mentions can be found in their programmable taillight flasher. The taillight flasher has 3 progressive modes, you could use the brake and reverse light inputs to steady burn the light heads, and can change the...
  13. buddek09

    Halogen Traffic Advisor With 4200

    You should be fine without using relays. The TA outputs are rated at 3 amps each.
  14. buddek09

    Feniex offroad...

    Yes they introduced the Fusion work lights after popular demand for the work light series. It was a soft launch if I remember correctly.
  15. buddek09

    Feniex offroad...

    They just released and be prepared for the sticker shock. I figured they would be expensive and I highly doubt we will ever sell one in our area.
  16. buddek09

    Did we get hosed? F250 Freedom Questions

    Meant Whelen not Federal Signal. Sorry wasn't thinking, first day back to work this week.
  17. buddek09

    Did we get hosed? F250 Freedom Questions

    I'm not familiar with FedSig pricing but I'd say they are lying to you about the lightbar. I don't know of any manufacturer that the price is the same regardless of length. 55" should fit up there without any problems. Sounds like maybe they had a lightbar sitting around they wanted to unload or...
  18. buddek09

    GE radio identification?

    It appears to be a GE MASTR model, produced from 1964-1973. I would guess, since the faceplate has LA Co. Sheriff printed on it, more than likely it was custom built for them. Being that it's plastic it makes it a later version, earlier models were die cast metal instead. Here is a link I found...
  19. buddek09

    Wiring question

    I couldn't find any info on the ULF2150A. I think you meant UHF2150A, if so then yes that will work because it's an isolated model.
  20. buddek09

    Wiring question

    Yes, a headlight flasher will work, just make sure to get an isolated flasher. It eliminates the need to use diodes and ensures you won't have feedback on the factory wiring, potentially frying the ECM. The only time a headlight flasher will not work is if the vehicle has the bulb out warning...
  21. buddek09

    Wiring question

    Yes I know that but they refer to the flashers for the brake lights as taillight flashers.
  22. buddek09

    Wiring question

    You need to verify that the light will see ground with the flasher off. More than likely the flasher only switches to ground when activated instead of breaking the ground connection. If this is the case you will need a relay to switch between ground and the flasher so the brake lights will work...
  23. buddek09

    Python 600 interior or exterior?

    You still need to remove the end cap and pop one of the modules out and look at it. The label has no useful info, I should of specified that their might be a label on the light modules. Looking at the module between the lens and housing you should see a gasket to seal it. If their is no gasket...
  24. buddek09

    Python 600 interior or exterior?

    That is a their Python 600 not a Cobra 600. You will have to pop the end cap off and look at the module, their is no way to tell just by looking at the picture. Pop the module out and see if you can see a gasket between the lens and the housing for the light. Might also be a label on it that...
  25. buddek09

    Wiring Apollo Mini-X to Typhoon Handheld

    Yes and no, you are correct with the wiring except the red wire. The red wire needs a constant power source, like the battery, because it needs to be fused at 10 Amps. The lightbar could pull up to 5 Amps. The Typhoon's outputs are only rated at a max of 3.5 Amps.
  26. buddek09

    FORD PIU

    Glad you found the rear seat bracket ground stud. No, their is no way to make them tilt forward unless you unbolt the rear and side of the seats every time. The front mounting brackets are the only thing that's the same on the seats. The rear mounting brackets are completely different. The...
  27. buddek09

    2017 Ford PIU headlight removal

    Yes, you have to remove the front bumper cover. Their is the bolt on top, one on the side behind the bumper cover, and one under the headlight towards the grille.
  28. buddek09

    FORD PIU

    It is visible, it would be in front of the foam even with the rear seat bolts on the passenger side. I usually have to bend it out of the way a little to get the seat back in because the feet want to get caught in it.
  29. buddek09

    FORD PIU

    Maybe it's only on some options but all the Utility's I've worked on since the power point was moved to behind the rear seats has had a ground post. It's just a simple metal bracket that's bolted in where the rear brace comes down to tie in by the passenger rear seat mount. It comes up and then...
  30. buddek09

    FORD PIU

    Unfortunately that is the only grounding point Ford recommends. Now they also have one behind the rear seats where the rear power access is at too. It use to be under the rear window but I'd say they had some complaints with where it was and they moved it. The green circle is where the ground...

Forum Statistics

Threads
53,962
Messages
449,805
Members
19,102
Latest member
Hilux01

About Us

  • Since 1997, eLightbars has been the premier venue for all things emergency warning equipment. Discussions, classified listings, pictures, videos, chat, & more! Our staff members strive to keep the forums organized and clutter-free. All of our offerings are free-of-charge with all costs offset by banner advertising. Premium offerings are available to improve your experience.

User Menu

Secure Browsing & Transactions

eLightbars.org uses SSL to secure all traffic between our server and your browsing device. All browsing and transactions within are secured by an SSL Certificate with high-strength encryption.