Search results

I use them and I really like them. But unless you have radios that you commonly leave on or you have to leave warning lights running without your engine running then they might not be for you. I use them to control the power to my 2 way radios so that they come on automatically when I start my...

I am currently using 2 Whelen Lin6 4 wire light heads set on steady burn in my Dominator D6 Tir3. I haven't had any problems so far with it. The unit had 2 clear modules and I wanted all red, so I figured I'd upgrade the number of LEDs at the same time.

I wish I lived close enough to get it.

I Have some of the mounts for those if you ever make it down my way.

Thanks for the replies. I have seen or well seen on the internet a lot of the 180 degree pattern lights. The only ones I have had in my hands are the Whelen multi funtion lights that are Warning/flood/puddle, they worked great on my back bumper for rear warning. I have several of those but...

I have a 2004 Ford Explorer that I am working on outfitting for myself. I am wanting to add some lights to the side of my grill guard to aid in intersection/side warning. I am partial to Whelen equipment but have been impressed with the soundoff mpower lights here lately. I have given...

Here is a few more pictures. I don't know if it is a good thing to look like them or not..... ha. It did turn out better then I expected which is rare for me.

This is the best pic I have at the moment of it. I will post more when I can.

Yes, actually I finally found one and got it installed been meaning to post a picture but I keep wanting to do more to it and figured I'd wait till the explorer is done.

I am currently trying to decide what lights I am going to put on my new to me 2004 Ford explorer. I installed a gill guard on the front of it and I want to install some light heads on it. I am currently looking at the SoundOff mPOWER Fascia 4” Perimeter Lights. If I use the stud mount version...

I am looking for some parts to make some upgrades to one of my local fire departments engine. It currently has a 72" strobe edge bar and I want to convert it to LED. I am needing the following items for the bar. It is currently blacked out to the rear and I will not be putting anything in it...

I sent you a Message about the console.

Thank you for the reply and the pics. What would you want for the console? I am located in central Kentucky.

Thank you and please do post the pics when you get a chance to

Thank you so much for confirming what I thought. I have a mild experience with Whelen product and thought it would work but wanted to make sure before I bought product. I guess now the question is where to get the modules from. I have started looking around this forum with no luck, guess Ebay...

My department has a 72" Whelen Edge strobe bar on a Peirce Pumper. Thru the years it has burnt up several strobe tubes and power packs. The parts seem to keep getting harder and harder to find. I am wanting to know if it would be possible to convert the bar to LED by using possibly Freedom...

I am looking for a Havis Console model # C-VS-1200-EXPL to fit my 2004 Ford Explorer. I have included a picture of the unit in question. I am located in Central KY. Thank you in advance for anyone's help finding one.

It might be possible but when I bought it the roof rack cross bars were gone. Even if I had the cross bar I think the light bar would be a lot of weight and torque for a single cross bar to hold. At least on my previous fords the roof rack bars aren't that sturdy. Plus I think it would look...

Thank you for the replies. My bar is a 48" bar and I am currently using the stud mounts that are commonly used on a wreckers to mount it on the head ache rack of my pick up truck. I think I am going to give the MKEZ74 kit a try because I believe from a quick google search that my roof rack...

I recently bought a 2004 Ford Explorer 4 door with a roof rack for my personal vehicle. I want to take my liberty light bar that I have and mount it on my new explorer but I can not seem to locate the proper bracket set part number I need. I would like to mount the bar on my roof rack rails if...

Any of that should work even if I have to piece it together. My lenses right now have not optic to them just a smooth finish but I don't mind to change it.

I need some various parts for Whelen advantedge bars Advantedge 5000 8" of red lens 2 red end caps with gaskets Advantedge 4500 2 rotators current rotator is part # 02-0363554-00A Please let me know if you have any of the parts listed, may be interested in buying whole bars for the parts if...

He was from the county next to me and I had trained with him a few times, great guy.  I attended his funeral and took a truck for the procession, It was great service and an amazing turn out from everyone in the area to support his family and department.

I'm looking to try and find a oscilaser or something to put in the middle of the grill guard. And I do have some strobes I plan on putting in the rear. My truck tends to find its way on scene a lot and now that I'm on a department that is far more active, I'm wanting to get some more lighting...

Thanks for the comments everyone.  I hate to pull the mx off, i agree it looks good on the truck. But I am hoping to get a lil more punch out of the liberty.  If I don't like the looks I may put the mx back and trade the justice off my CVPI for the liberty.  Just got to play around and see how I...

My 96 F-150, this is my daily driver on the weekends and one of my POVs.  I tend to work out of it and I never know what I will be getting myself into. On the front: Whelen Tir6 Red Whelen Tir3 Amber Whelen V23 Amber mounted on each side of grill gaurd Sound off 500 lumen trapezoid pattern...

I definitely think I will. Cool, I've been thru there a few times

Thanks for the welcomes, I've already leaned some and found some good deals. I'm on Leitchfield and wax fire departments.

I'm joining this forum to try and expand my knowledge, with the help of everyone else here of course.  I've delt with a lot of lights, sirens and installs. We all get stumped sometimes.  I've built and installed a lot of Code 3 and whelen bars, mostly older stuff put together from spare parts...