Arjent Question

Muxlow

Member
Jun 2, 2010
217
Middlesex/ontario
Im fixing up a arjent bar for someone and just want to make sure what i think is correct

The board inside the bar has part number 2005395C

Only wires that come out are the 2 power and Ethernet cable
I assume this has to be connected to a controller to enable the bar? No way to use it standalone?
 

Attachments

  • IMG_20210906_1927035.jpg
    IMG_20210906_1927035.jpg
    178.1 KB · Views: 8

C17LVFD

Member
May 21, 2010
1,537
Harrisburg, PA
If all the modules are separately wired with three wires going to each modules vs all lightheads being mounted and soldered on a giant circuit board, you can rewrite it to not use the SIB. Since I can’t see the rest of the bar, unknown if it’s possible.
 
May 21, 2010
1,258
Minnesota
That requires the external control box. The model should be S2, the ones that dont require an external controller are SL.

Unfortunately I dont know the model numbers of the serial controllers that would work for that. Might be worth an email to Federal Signal for that.
 
  • Like
Reactions: C17LVFD

Lux Ferous

Member
Feb 24, 2012
55
Chicago, Illinois
What you have is a Arjent S2 light bar and to operate this bar you need serial interface module or the four, six, or nine-button convergence network programmable controller. Only Arjent SL bars can be wired to regular switch box.
 

JohnMarcson

Administrator
May 7, 2010
10,971
Northwest Ohio
What you have is a Arjent S2 light bar and to operate this bar you need serial interface module or the four, six, or nine-button convergence network programmable controller. Only Arjent SL bars can be wired to regular switch box.
Pretty much the LED equivalent of Whelen PCDS9 serial stuff. You are essentially locked out without the controller. I think 911EP and sound off pulled the same trick on a few models at one point.
 
  • Like
Reactions: Lux Ferous

Forum Statistics

Threads
53,970
Messages
449,819
Members
19,104
Latest member
airflores

About Us

  • Since 1997, eLightbars has been the premier venue for all things emergency warning equipment. Discussions, classified listings, pictures, videos, chat, & more! Our staff members strive to keep the forums organized and clutter-free. All of our offerings are free-of-charge with all costs offset by banner advertising. Premium offerings are available to improve your experience.

User Menu

Secure Browsing & Transactions

eLightbars.org uses SSL to secure all traffic between our server and your browsing device. All browsing and transactions within are secured by an SSL Certificate with high-strength encryption.