crt6mrt-265
Member
Hello all. Arrived yesterday was a new to me used set of cannons. I've had cannons in the past and never had an issue. One fires away with no problem, the other has 3 diodes come on verry dull and flicker as a pattern. Ways I've troubleshooted:
1. Change power source
2. Attach both lights together thinking one is a slave
3. Play with slave/ master mode
4. Change patterns
Nothing has changed it. I'm doing bench testing so the wires are solid to 12v + and ground. The lights are from 2014 so warranty is still in effect. I'm thinking the driver has a fault in it, but i'm not good at troubleshooting too that extent. Figured i would ask here first in case it's something simple before initiating anything for warranty. Thank you everyone.
1. Change power source
2. Attach both lights together thinking one is a slave
3. Play with slave/ master mode
4. Change patterns
Nothing has changed it. I'm doing bench testing so the wires are solid to 12v + and ground. The lights are from 2014 so warranty is still in effect. I'm thinking the driver has a fault in it, but i'm not good at troubleshooting too that extent. Figured i would ask here first in case it's something simple before initiating anything for warranty. Thank you everyone.