FusionWolf
Member
Hey all I got a bit of a conundrum.
I have a custom traffic advisor made of whelen 400 heads. I have it hooked into the traffic advisor port on the CanTrol unit however I cant get heads 4 and 6 to light. I used a power probe to check power and ground however I'm getting 12v both power and ground on the lights. I rechecked all my wiring and confirmed nothing is mixed up. Next I'm going to test the ports on the cantrol to make sure it's not outputting 12v on all ports, sadly the weather sucks outside so cant do it at the moment.
does anyone have any suggestions of what to look at or if I may have something programmed wrong? From what I'm seeing the traffic advisor output is only ground switching
Thank you all.
I have a custom traffic advisor made of whelen 400 heads. I have it hooked into the traffic advisor port on the CanTrol unit however I cant get heads 4 and 6 to light. I used a power probe to check power and ground however I'm getting 12v both power and ground on the lights. I rechecked all my wiring and confirmed nothing is mixed up. Next I'm going to test the ports on the cantrol to make sure it's not outputting 12v on all ports, sadly the weather sucks outside so cant do it at the moment.
does anyone have any suggestions of what to look at or if I may have something programmed wrong? From what I'm seeing the traffic advisor output is only ground switching
Thank you all.