Code 3 change flash patterns CODE RX2100
- Thread starter Watcharin64
- Start date
I don't know that Code 3 ever made an RX2100. The only bar I know of with a model number beginning with the letters RX is the RX2700.
If I remember correctly, there are two pins that protrude from the back of the board. Momentarily short them and cycle through them. One item, they can go into steady burn to add your own flasher. But the corners, for some reason, not steady.
They have both. The RX2700, the LED's are controlled with a single board.
The lightbar that you have, was called the 2300 series. It was Code 3's Economy lightbar which had dumb heads and economy LED's too (Didn't last long) Same heads as in the XF2300 series or Dog Bone when it first came out. The LED's were flashed by a 700 or 710 flasher, that was the only way to flash those dumb heads. to make the patterns more appealing my shop had made different wiring harnesses and changed then to different lugs on the flasher. The 2300, was built on and in the 2100 platform only they didn't change the decal indicating 2300. So unless I'm wrong those heads shouldn't have the 2 prongs or the 2 foil tabs to change flash patterns.