Does the WeCan Inner Edge Plug directly to the Cencom Carbide?

[captskyhawk]

I want to change out my ILB for a wecan version because our purchasing department finally spent a little more money this year and got the cencom, but the current bar is the LC version.

I've never installed a wecan product, does the wecan port go straight to the cencom unit or do you have to use the control point?

Thanks!

 

[801]

Does your CenCom have the WeCan port on the back? if so yes. If not then you will have to wire the control point to the CenCom.

 

[smokeeatertk28]

All cencom Carbides have the option to plug up to 3 or 4 WC devices on it to.
So you are saying the Lightbar is LC and you have a WC inneredge?

It will work than. even if it had a WC lightbar u can still use it. just wire it up to the 3 wire WC port and Program the Carbide to let it know that you have installed the Inner Edge and what pattern you want it to use...

 

[captskyhawk]

All cencom Carbides have the option to plug up to 3 or 4 WC devices on it to.
So you are saying the Lightbar is LC and you have a WC inneredge?

It will work than. even if it had a WC lightbar u can still use it. just wire it up to the 3 wire WC port and Program the Carbide to let it know that you have installed the Inner Edge and what pattern you want it to use...

No, it's a slick top with a LC Inner Edge, but I want to buy a WC Inner Edge FST when they are released. Just want to prep the vehicle so I can plug and play when I get it.

Sounds Like I will have to wait, though, to run the WC cable from the front to the rear where the Cencom is mounted.

 

[smokeeatertk28]

Let me know when you get the inner edges I'll tune your carbide with a cool flash pattern and other cool shit lol

 

[WhelenNDealin]

Let me know when you get the inner edges I'll tune your carbide with a cool flash pattern and other cool shit lol

I read in another post somewhere that you have a ton of different programs for Carbide. I'd be interested in some of them, if it's possible. Anything with great flash patterns for the Slide Switches would be much appreciated.