Dual Color Flash Patterns

[theroofable]

Looking for some help with dual color light programming. Im using the cencom carbide with dual color ions and a dual color liberty. I'm not a fan of the no off time between switching colors. For example the off time on a single color light is filled with the flash of the other color. Are there any patterns that give some off time between the colors?

 

[CanamRider]

Don’t think so. If there is I haven’t found a way either...

 

[Sparky_911]

Ive never had my hands on ions, but the only pattern I'e ever seen that comes close to that is the ping pong pattern. It's not a very good pattern imo. The only way to get off time is wire them to a flasher that does. And that only works if you have separate trigger wires for each color. I had to do that to my M6s.

 

[theroofable]

Maybe they will add that as an update in the future to the software. Was just wondering if someone had figured out a way. I guess trio patterns aren't possible with the carbide then? There wouldn't be any time for the third color to flash.

 

[got_yogurt]

Some of the CTScan and Duo Scan patterns might be close to that, there’s so many I haven’t sat through them all but it’s worth a look