ronaconda
Member
Searching this topic has yielded various results. I have read, and seen, different descriptions of what wire does what on the Edge bars and what i have experienced doesn't match any of them LOL!!! My bar is 4 strobe and 8 halogen lights (no alley lights). I have connected the red and black to positive and negative respectively and started touching the other wires to positive to see what the wire controls. The only thing that i have been able to make work is the 4 strobes in the double flash pattern by applying 12v to the white with black stripe wire. Additionally, applying power to the solid white wire cut out the front strobes. I never got the halogens to do anything. I read in search results that the black stripe wires are actually grounds...confirmation of this would be helpful. There is only one large cable coming out of the bar and a pic is attached. The only wires that are not shown are the black, white, and shield wires for the speaker. The sticker on the bottom of the bar offers no help in regards to the model, but based on what i have read it is a 9XX4 model. Thanks in advance!