[Broken External Image]:
http://img833.imageshack.us/img833/280/0326111241.jpg
This is an in service piece of apparatus, with less warning power than most apparatus from the 1980's. Upper rear: 2x RB6T; Lower Rear: 2x LIN3; Rear Side: 1x LIN3
[Broken External Image]:
http://img846.imageshack.us/img846/9287/0326111304.jpg
The staggered approach to lighting. I've seen this done with 900-series LED lightheads, and I understand why they do it.
[Broken External Image]:
http://img109.imageshack.us/img109/2100/0326111318.jpg
For an emergency warning device that cannot be turned off, these chevrons seem to be a compromise. This truck is all PowerArc.
[Broken External Image]:
http://img190.imageshack.us/img190/225/0326111321.jpg
This reminded me a little bit of ECTO-1.
[Broken External Image]:
http://img41.imageshack.us/img41/4067/0326111323.jpg
A Code 3 RMX, two photos.
[Broken External Image]:
http://img824.imageshack.us/img824/1191/0326111324.jpg
A Code 3 RMX, two photos.
[Broken External Image]:
http://img864.imageshack.us/img864/5389/0326111327.jpg
These are silly with directional LED lightheads installed only facing forward, two photos.
[Broken External Image]:
http://img841.imageshack.us/img841/2748/0326111328.jpg
These are silly with directional LED lightheads installed only facing forward, two photos.
[Broken External Image]:
http://img215.imageshack.us/img215/8320/0326111329.jpg
This is apparently there for preemption. I have mixed feelings about this, two photos.
[Broken External Image]:
http://img29.imageshack.us/img29/9930/0326111330.jpg
This is apparently there for preemption. I have mixed feelings about this, two photos.
[Broken External Image]:
http://img862.imageshack.us/img862/6761/0326111331.jpg
I thought the clear section was supposed to be centered. The next photo is of the same truck.
[Broken External Image]:
http://img846.imageshack.us/img846/4149/0326111332.jpg
The LIN3's here are a bit confusing. The previous photo is of the same truck.
[Broken External Image]:
http://img534.imageshack.us/img534/7382/0326111333.jpg
This would be a great application for that little purple wire, "low power" mode.
[Broken External Image]:
http://img687.imageshack.us/img687/6546/0326111334.jpg
All around this truck, they made cutouts for 900-series lightheads, and then installed M9 series lightheads. When asked about this , the gentlemen sitting around replied "the customer asked for it that way."
[Broken External Image]:
http://img688.imageshack.us/img688/5732/0326111338.jpg
Here's the new Code 3 XP 9500. It's definitely different. Also, I like the vinyl graphics on the truck. Two photos.
[Broken External Image]:
http://img843.imageshack.us/img843/7056/0326111339.jpg
Here's the new Code 3 XP 9500. It's definitely different. Also, I like the vinyl graphics on the truck. Two photos.
[Broken External Image]:
http://img232.imageshack.us/img232/4018/0326111343.jpg
The staggered 900-series seem to make a little more sense than the staggered 700-series at the top of my post. The photo below is of the same truck
[Broken External Image]:
http://img862.imageshack.us/img862/6292/0326111344.jpg
Air horns through the bumper work better on vehicles with bumpers that don't curve like this. The photo above is of the same truck.
[Broken External Image]:
http://img841.imageshack.us/img841/3334/0326111345.jpg
These tandem dual Pioneers block most of the intersection warning.
[Broken External Image]:
http://img195.imageshack.us/img195/4452/0326111348.jpg
This Roto-Ray looks strange to me. It looks like PAR36 Tomar LEDs in PAR46 housings.
[Broken External Image]:
http://img26.imageshack.us/img26/9532/0326111354.jpg
I really, really like this idea. I had never seen extinguishers in this location, but it makes so much sense!
[Broken External Image]:
http://img38.imageshack.us/img38/3069/0326111411.jpg
Here's the new Code 3 RMX on display. It looks like MX7000 upper domes on RX2700 lower domes.