Federal Signal Signalmaster Question

[bkulibert]

What switch/control box is this person using to operate this signalmaster:

 

[CHIEFOPS]

I may be wrong but based on the independent endlamps I don't believe those are FedSig patterns, at least not early generation SignalMaster

 

[CrownVic97]

The person has that SignalMaster hooked up to a SMC5 controller, with light heads 1 and 8 in the AUX output to alternate flash. The other modes can only be done with the SMC5.

 

[kitn1mcc]

that is some depressing music

 

[CHIEFOPS]

I stand corrected, thanks

 

[bkulibert]

The person has that SignalMaster hooked up to a SMC5 controller, with light heads 1 and 8 in the AUX output to alternate flash. The other modes can only be done with the SMC5.

okay, so I hooked up light heads 1&8 to AUX output. I then pressed the AUX button on controller they just come on steady, not alternate flash.

 

[shues]

Have a look at the SMC5 manual, here: https://www.fedsig.com/resource-document/file/8117

I've pulled out a few sections that I believe to be relevant:

From page 2:​

​

From page 11:​

​

From page 12:​

 

[lbs5]

Hello everybody. I bought signalmaster SML-KS with 8216106 controller. Unfortunatelly the cables were cutted, so I don't know how to connect this. Do you have any manual of this kit? Or can you help me which colour from lightbar should be connect with port number? From the lightbar are 6 wires: brown and red - fat wires (+-) and thin : green, yellow, white and black. I have manual for SML-KS-LED, but there no yellow wire :-( Regards from Poland.....

(22012020) Solved thx

 

[WPO]

Hello, i habe the same problem... same lightbar, but no manual... mabe someone can help me?