jdip
Member
Changed my system over to a Pathfinder handheld and mounted everything in a tuffy under seat lockbox in my truck so parting ways with my Smart Siren. This is the newer firmware model B with unitrol tones etc. Control head is on latest firmware, and so is the Amp. It's in great shape with plenty of wire and was mounted to a mounting board on the back wall of my Silverado. Control head was always kept clean.
I have two faceplates for it, I don't know if they are havis or jotto but I'll throw those in if you need them.
Missing the cat5 cable as mine was reused, and PA mic. There is a small corner piece missing from the amps mounting flange near the factory hole but I used a hex head screw and it still mounted vertically perfectly fine.
This has low hours, it was in my POV and I normally have the department truck to myself.
Ignore the redundant labels on the control head I reused some on my Pathfinder. I will include my leftover labels as well with this unit.
250 shipped with tracking and insurance.
I have two faceplates for it, I don't know if they are havis or jotto but I'll throw those in if you need them.
Missing the cat5 cable as mine was reused, and PA mic. There is a small corner piece missing from the amps mounting flange near the factory hole but I used a hex head screw and it still mounted vertically perfectly fine.
This has low hours, it was in my POV and I normally have the department truck to myself.
Ignore the redundant labels on the control head I reused some on my Pathfinder. I will include my leftover labels as well with this unit.
250 shipped with tracking and insurance.
Attachments
Last edited: