Feniex 4200DL Re-Install Help

melt

Member
Mar 20, 2011
62
Oconomowoc, WI
I am reinstalling my 4200DL controller, relay, and BT module into a new truck. Everything was working perfectly when I removed it from my old truck. After installing everything into the new truck here is what is happening:

  • Relay has power to the red 12v and ground to black.
  • 12v power to the G and H inputs on the relay
  • Green LED on relay is blinking when truck is turned on
  • The controller is able to be programmed by my PC (using the USB cable) without issue
  • When plugging the BT module into the relay using a Cat5e cable, no power light for the BT module, and no power to the controller
  • When plugging the controller into the relay (using a Cat5e cable) without the BT module no power or anything to the controller

Is there anything else I can check for this? Any other thoughts? This was purchased in late 2016/early 2017.
 

Carlos SpicyWeiner

Lifetime VIP Donor
May 3, 2012
5,233
Lakeland, Florida
Cat 5 cable most likely went bad
 

Forum Statistics

Threads
53,964
Messages
449,809
Members
19,103
Latest member
Safetylight5

About Us

  • Since 1997, eLightbars has been the premier venue for all things emergency warning equipment. Discussions, classified listings, pictures, videos, chat, & more! Our staff members strive to keep the forums organized and clutter-free. All of our offerings are free-of-charge with all costs offset by banner advertising. Premium offerings are available to improve your experience.

User Menu

Secure Browsing & Transactions

eLightbars.org uses SSL to secure all traffic between our server and your browsing device. All browsing and transactions within are secured by an SSL Certificate with high-strength encryption.