Flasher for fusion ILB

[needforspeed]

Can a different flasher be swapped into an Fusion ILB so it can be sync'd with other lights?

 

[needforspeed]

Specifically I was told that the Fusion dummy heads can be controlled by;

Constant +12V to red wire
Constant ground to black wire
+12V to trigger wire for steady, or pulse +12V for flashing at pulse rate

Do I understand this correctly?

 

[FusionWolf]

Specifically I was told that the Fusion dummy heads can be controlled by;

Constant +12V to red wire
Constant ground to black wire
+12V to trigger wire for steady, or pulse +12V for flashing at pulse rate

Do I understand this correctly?

If they use dummy heads (2wire) then yes you can use an external flasher. You have to rewire the bar. But I made a custom bar for my Xterra using dummy heads and hooking it up to CanTrol. Works flawlessly and allows sync to other lights

 

[needforspeed]

So the answer is yes as described above. The three wire modules I have work fine with a separate positive flasher. I'm going to use a ULF-44 to get the patterns and sync that I want.