philyumpshus
Member
We have a 2000 Hackney heavy rescue with all halogen lighting. There are 2 main flashers, one does the upper lighting and the other the lower, which is eight 600s and two 900s. The problem is that they have been working for a few minutes, then they cut out, then they work again. I got to the whole board where everything is wired; the problem is that the relay (40A) and breaker (20A) are getting extremely hot, which causes them to overheat and cut out. What I can't figure out is why they are doing this, especially because they're mounted in a Class 1 circuit board, so all the connections seem good.
Does anyone have any ideas? I'd rather not have the rescue burn down.
Does anyone have any ideas? I'd rather not have the rescue burn down.