This is an example of how NOT to install emergency lights on a UTV.
This Expert Installer uses the following State-of-the-Art Install Techniques such as;
1) Uses his Custom Hot Screw Driver to punch holes through plastic body panels for wiring loom;
2) Uses Home Cheapo-style low voltage multi-strand Sprinkler Wire for his wiring loom;
3) Only buys quality emergency lights and siren from Amazon;
and the best for last;
4) Uses metal zip ties with black electrical tape spray to conceal the shiny metal.
UTV Install
Btw, I searched for the old worst install thread and couldn't find it with the new forum reformatting.
This Expert Installer uses the following State-of-the-Art Install Techniques such as;
1) Uses his Custom Hot Screw Driver to punch holes through plastic body panels for wiring loom;
2) Uses Home Cheapo-style low voltage multi-strand Sprinkler Wire for his wiring loom;
3) Only buys quality emergency lights and siren from Amazon;
and the best for last;
4) Uses metal zip ties with black electrical tape spray to conceal the shiny metal.
UTV Install
Btw, I searched for the old worst install thread and couldn't find it with the new forum reformatting.
