I have a UHF Motorola MT2000 radio, 48 channels, and top display. I have it programmed already for receive only, I just need a few more frequencies programmed in it (receive only). Is there anyone on here who can do it, for a price?
I need my Motorola MT2000 reprogrammed
- Thread starter fedsig7
- Start date
Terry L
Member
There are a few folks on Ebay that offer the service for a reasonable price with good feedback. I've never personally done it though.
wkr518
Member
Is it a federal model? I ran into 4 of these once out of PA. The regular software didnt work on programming them.
wkr518
Member
chances are its not federal. Is it model 1,2,3? If it has a front display you can check the firmware revision by pressing the lower small black button 5 times right after you turn the radio on. I can program MTs
WhiteLite03
Member
We do all our own programming at our FD, although we don't have any MT2000's. I'm sure if we have or could find the right cable, we probably have the software to program it. What state / area are you in?
WhiteLite03
Member
I'll check with my LT who does the programming with me and see if we have the stuff to do it. If so, I'm fairly certain we could do it for close to nothing other than shipping. It's not really labor intensive, just a matter of having the stuff. I'll post back after I ask him.
WhiteLite03
Member
We've never tried to do an MT2000. We can do the HT series, and the MT1000, so if the cable would be the same we probably have or could get the software for it. Maybe someone else on here can tell me if the HT cable fits that one? I've never actually seen an MT2000 in person, so I'm not sure, and I'm at work, so my researching ability is a little limited at the moment.
MT1000 and the MT2000 are not the same platform. The MT2000 uses the Jedi cable. With that cable you can program any MT2000 MTS2000 HT1000 XTS3000 XTS3500 and others.
WhiteLite03
Member
If that's the case, we've got the cable. I'm working doubles all weekend, so I won't be around the firehouse much, but I'll shoot my LT a text and ask him to make sure we have the right software.