Jet Solaris lighthead cut-off

bdwhit

Member
Jun 26, 2010
112
Olathe,Kansas
I have a Solaris lightbar that is being mounted on a 'high cube' ambulance, and I need to disable the rear LED heads. I pulled up the install paperwork online, but was unable to turn the heads off. Manual states that the green wire is used for front or rear light cutoff, but when the bar is powered 'on', applying or removing 12v to the green doesn't shut off the heads. Any suggestions?
 

C17LVFD

Member
May 21, 2010
1,537
Harrisburg, PA
Likely it’s not wired the way you’re needing to use the bar. My suggestion would be to open it up and remove the wiring to the rear heads from the flasher.

Best of luck,
Seth
 

bdwhit

Member
Jun 26, 2010
112
Olathe,Kansas
Seth,
That was my idea as well. I noted that some of the other wires in the bundle do not work as "advertised". It;'s an old wrecker bar w/stop/tail/turn on the rear corners and 2 work lights facing the rear in the center section. I need to open the bar up to clean it and install new domes & a new power cable anyway. Thanks BW
 
  • Like
Reactions: C17LVFD

Forum Statistics

Threads
53,968
Messages
449,817
Members
19,104
Latest member
airflores

About Us

  • Since 1997, eLightbars has been the premier venue for all things emergency warning equipment. Discussions, classified listings, pictures, videos, chat, & more! Our staff members strive to keep the forums organized and clutter-free. All of our offerings are free-of-charge with all costs offset by banner advertising. Premium offerings are available to improve your experience.

User Menu

Secure Browsing & Transactions

eLightbars.org uses SSL to secure all traffic between our server and your browsing device. All browsing and transactions within are secured by an SSL Certificate with high-strength encryption.