I am restoring a Federal Signal Jetstrobe wrecker light bar. I am in need of one stop - turn - tail light housing. It cannot be a takedown or alley light. It needs to have 2 wires going into it and the contact plate inside the socket needs 2 contact points. The cut outs in the socket must be staggered to accommodate the staggered posts protruding from the side of the bulb since it has 2 filaments. See attached photos for details.
Attachments
-
C463FE53-14F7-4E32-990B-6704F7C1E56F.jpeg179 KB · Views: 3
-
D6379126-B2AB-4DC6-B27E-ADA8DF8F3AF5.jpeg207.6 KB · Views: 3
-
CFA11606-0245-4BCC-A855-BBAB7B248FA0.jpeg81 KB · Views: 2
-
A34754DB-F823-4C16-AE7D-7DFF7A323B63.jpeg90.7 KB · Views: 2
-
11FAED53-8553-4977-BE0B-3DD1D87C9EE0.jpeg79.2 KB · Views: 3