Wanted LAPD Aerodynic center mirror

[chevy184]

Hi all


I am restoring my LAPD “ all light “ 24EAH T Aerodynic lightbar and i am missing some parts.

Most of the parts i already have found ( par holder , Wagner H7604 bulb, code 3 360HL Flasher) but still looking voor the left mirror or right mirror that is behind the takedown light in the middle section off the lightbar.

I know it is a hard to find part

but hope somebody can help me whit this part or locate the part so that i can make my LAPD Aerodynic complete.
Have US shipping address.

 

[Stampeed Valkyrie]

a fabricator is probably going to be your best bet.
I had to do this for another bar that I was working on recently.
These shouldn't be to hard to fabricate and probably can be done pretty simply by a machine shop.

 

[ERIC6913]

I know someone who reproduced these. PM me

 

[chevy184]

Eric i have send a PM

 

[chevy184]

a fabricator is probably going to be your best bet.
I had to do this for another bar that I was working on recently.
These shouldn't be to hard to fabricate and probably can be done pretty simply by a machine shop.

a fabricator is probably going to be your best bet.
I had to do this for another bar that I was working on recently.
These shouldn't be to hard to fabricate and probably can be done pretty simply by a machine shop.

I think i do that because i know they are hard to find
and they are not so hard to fabricate new.
But first i will wait for Eric.

 

[Citabria7GCBC]

I think i do that because i know they are hard to find
and they are not so hard to fabricate new.
But first i will wait for Eric.

If you end up having to fabricate one let me know so we can do an order of two. I need one for my LAPD aerodynic too.

 

[LtsandSirens]

a fabricator is probably going to be your best bet.
I had to do this for another bar that I was working on recently.
These shouldn't be to hard to fabricate and probably can be done pretty simply by a machine shop.

Trying to locate the center bulkhead for an all light Aerodynic(LAPD) ... any suggestions ?

 

[Stampeed Valkyrie]

@LtsandSirens Try hitting up @ERIC6913 via PM he posted earlier he works with a fabricator. That might be your best bet.

 

[ERIC6913]

Sorry, my fabricator contact for these mirrors is no longer.

 

[soutthpaw]

I can make them out of some stainless steel or aluminum if you had the specs

 

[empire5150]

I have both mirrors. I recently got in a complete LAPD bar and it may need to Just be parted out due to a couple issues. PM me your budget and ill decide if I will part it out or not.....