LED Flasher

[evanf3]

Can I use a headlight flasher on a pair TIR3 style light head and put them on steady burn?

 

[rwo978]

yes, if they're hooked up correctly in regards to positive or negative flash.

 

[localhero800]

I was wondering the same.. i have some 52 series.. so i would ground the black wires, and put one red to one side , and one red to he other , just like wiring a halogen light?

 

[unlisted]

I was wondering the same.. i have some 52 series.. so i would ground the black wires, and put one red to one side , and one red to he other , just like wiring a halogen light?

Yes. Just make sure you put them both onto steady burn first... or you may get some interesting patterns.. Also, do NOT hook up the sync wires.


(thats how I did all my LAW reviews- put them all on steady burn and used the same Taillight flasher)

 

[localhero800]

ok.. thanks.. could you use a fa3 style flasher, or sould it be a sealed unit

 

[unlisted]

How about any type of vehicle flasher will work? I'm pretty certain there MAY be some types of automotive flashers that may get buggered up, but again, I have not tried them all. I know relay PS flashers do work.


Try it out, the worst that will happen is the flasher MAY stick on one side, and not "alternate"

 

[localhero800]

ok.. i wil give it a try!!