Mini Code 3 MX 7000

[Bobcat753]

Looking for the above. Color doesn't matter just want it to keep my full size MX company.


Condition is important. Must be like new or used sparingly.


Would like it to have sweeps.


Will pay cash or have some trade items.

 

[7d9_z28]

For what its worth,

That is just the outboard top/bottom of an MX, if you could find a used MX in decent shape they are usually cheap, you could make two of these (as if they were on the back corners of a fire engine).

Just my $.02, I have never seen JUST one of these minis for sale.

 

[EHFD_Tower_751]

if feeling adventerous.........i have almost all the parts needed to make your own.

i have these:

2 lower domes (polishing them would make look decent)

metal rotator decks

abundance of lower lights (no sweeps unfortunately)

1 freeform rotator

possibly have a set of cascade mirrors (someone was interested in them, but no word back), also getting a few other MX parts, but not sure what all is included.

 

[Pete L.]

What he said................. 7d9_z28

I have never seen an actual mini. I would LOVE to have one.

I would put sweeps on all 4 corners and have some fun with it.

 

[Bobcat753]

Yea they seem rare but I know of a few actual minis. They are still in service on local firetrucks.

 

[ChargerLighting]

Code 3 never made the mini MX without the flat side on one end....but I did a few years ago

They do make the 22.5" Excalibur beacon with all 4 sides the same.

They also still make the 18" beacon like the one pictured with one flat side.

Thought I had pics of the one I made, but it was a few computers ago....

 

[shues]

Thought I had pics of the one I made, but it was a few computers ago....

I found these photos in post 19 of the old Custom Lightbars thread, here:

 

[Pete L.]

That looks great, Mike

There has to be some top domes out there. I'd love to find one and

make an MX lower for it like Mike did. I was never a big fan of the Excal. lowers.

 

[Mattdecker]

I found these photos in post 19 of the old Custom Lightbars thread, here:

This may have to be my next project. Lol. Something else to add to my list.

 

[ChargerLighting]

Thanks for finding that, shues...forgot all about that thread.

They're not hard to make...had to cut 2 lower domes to make 1, cut a few center decks to size, cut the fiber-board dividers to size & order new lens gasket strips from Code 3. The upper domes are the same for the Excalibur 22.5" beacon.