Molex connectors on Sapphire

[WhelenNDealin]

What models of Molex connectors are used on Sapphire systems? I'm just using it for display/bench testing purposes. I have a brain but no cables. I think that I could just use female connectors for the main power and 20A and 40A outputs, but the issue is which connector types are used for the 10A outputs and especially the system I/O.

Besides the TA connector, did Whelen use an uncommon connector or are they easy to find and I could rig up my own with some of the right pins?

If the connectors are tricky to find, are there any workaround solutions for this? I'm mostly interested in the siren speaker outputs and a couple of specific inputs.

Thanks!

 

[FusionWolf]

10-CCK CENCOM Sapphire Connector Kit | All Fleet Solutions

The 10-CCK is a Connector Kit for Whelen CenCom Sapphire. This kit includes: (2) Four Position Molex Connectors, (1) Eight Position Amp Connector, (1) Five Position Relay Connector, (1) Fourteen Position Mini Universal Mate-N-Lok Connector; includes terminals. Printable Data Sheet

allfleetsolutions.com

This might help you out. I believe its a kit of connectors but I also see part numbers on it as well that may correspond to the molex part number if you only need certain ones.

 

[Aidan Bahner]

10-CCK CENCOM Sapphire Connector Kit | All Fleet Solutions

The 10-CCK is a Connector Kit for Whelen CenCom Sapphire. This kit includes: (2) Four Position Molex Connectors, (1) Eight Position Amp Connector, (1) Five Position Relay Connector, (1) Fourteen Position Mini Universal Mate-N-Lok Connector; includes terminals. Printable Data Sheet

allfleetsolutions.com

This might help you out. I believe its a kit of connectors but I also see part numbers on it as well that may correspond to the molex part number if you only need certain ones.

That helps me out alot too thanks