MPC01 - Assistance for the operation

[IndianWells]

I have a siren Amplifier BL627 connected to the MPC01 and would like to use the MPC01 function control for a analog lightbar.

But I even don't know where there signals or functions goes out of the MPC01?
The only output contacts are orange and yellow on the J16 AUX plug.
Who's got this controller and can enlighten me?

 

[shues]

There is a wealth of information available in these two threads:

 

[IndianWells]

 





Thanks for the link.
Does that mean I can not control old lightbars - such as a code 3 LP 6000 - with the MPC01?

 

[MEVS06]

Yes you can, but you need the interface box.

 

[shues]

Yes you can, but you need the interface box.

The BL8140 relay box could be made to work for this application.

 

[massfirefighter]

You could use the orange and yellow wires to close relays to control two functions.

 

[IndianWells]

@massfirefighter

I already have tried, but it does not work. Maybe this is turned off in the software.......