need helpon a mx7k loaded bar?!

[fireman846]

ok heres what i got i have a strobe mx7k with smart sweeps and i am trying to wire it all back together and have everything work righ. they guy i got it from took everything out and put leds in it. i got strobe power supplys figured out now its down to the sweeps i have the 4 pin wires in place, what wire do i use to power the lil suckers with? i have a couple of wires that have no connectors on them! i will have pics up wed afternoon. if some one can show me the inside of theirs or a real wire diagram that would be great.. i do have the book on it just no diagram on what wire goes where!!! help please thanks!

 

[ChargerLighting]

The smart sweeps should plug into a central controller (black box) inside the lightbar - probably in the center section. Since you mentioned he took everything out, he may have taken out that box as well.


If the black box is gone, you can still direct wire your sweeps; they just won't have the "smart" functions anymore.

 

[fireman846]

yea the box is there still its the wires to power the sweeps theres a few that have no ends that he jerry rigged in the bar to power the leds that were in there. i have to 4 pin wire harness in there now its down to powering them whitch wire goes to what kind thing