Jesse J Volanti
Member
Thank youI've used this. It's a 300XL025. Not 100% sure but I think 025 means it's 0.25" wide (300 = 30.0" long).
https://www.amazon.com/dp/B00CMICFQK/
Sorry man your link wouldn’t let me connectJust bought 3 of these and they worked perfect in my mini, http://rover.ebay.com/rover/1/711-5...0001&campid=5338077216&icep_item=321983699526
Just ordered 2. Now how do I remove the motor and disassemble without stripping or breaking off the nuts. On the right side diamond mirror I see there’s a broken nut. Found it when I was cleaning the bar. Do I use penatrating spray so this doesn’t happen. And thank you for your help.300XL025 Timing Belt | 30"" Length, 1/5"" Tooth Pitch, 0.25"" Width, 150 Teeth | eBay
Find many great new & used options and get the best deals for 300XL025 Timing Belt | 30"" Length, 1/5"" Tooth Pitch, 0.25"" Width, 150 Teeth at the best online prices at eBay! Free shipping for many products!www.ebay.com
It was broken off and I’m sure they did the same for the rest of the screws, a few are stripped from either torquing or wrong size philips. And what about the tension wheel.More than likely they snapped off the screw putting it in with a power driver, you might have to drill it out, good luck. If your lucky you might be able to put a vice grip on what's left of the screw and back it out.
YesI find this thread interesting. I have a mini XL9000, is that what thus belt is for? I was unable to locate any other threads when searching "XL belt"
They’re a common part to find as a timing belt.I find this thread interesting. I have a mini XL9000, is that what thus belt is for? I was unable to locate any other threads when searching "XL belt"
Np it takes good people on this site who know how or knows some folks who can find parts.Thank you. I have not heard that before. IIRC some older threads talk of the near extinction of the supply of belts for the bar.